Audio-Technica offers these .7 mil conical cartridges in two available mounts. Audio-Technica has long been recognized as a world leader in phonograph cartridge design and production, Audio-Technica offers a wide range of models to match turntable/tonearm requirements, performance levels and budget considerations.
A
P-mount cartridge has four terminals at the back that simply plug in to the end of the tone arm. The cartridge is then secured to the tone arm with a single screw.
P-mount Model Specifications:
- Frequency Response 20-20,000 Hz
- Channel Separation 24/15 (dB at 1 kHz/10 kHz)
- Vertical Tracking Force 1.0-1.5 grams
- Stylus Construction Bonded round shank
- Recommended Load Impedance 47,000 ohms
- Output 5.0 (mV at 1 kHz, 5 cm/sec)
- Channel Balance 1.5 dB
- Stylus Shape 0.7 mil conical
- Cantilever Carbon fiber
- Mount P-mount
An
Universal Mount model is a P-mount cartridge with an included half-inch adapter bracket. It is thus compatible with both P-mount and half-inch mount tone arms.
A
Half-inch Mount cartridge also has four terminals at the back, but they are larger pins that connect to four individual wires at the end of the tone arm. The cartridge is secured to the tone arm’s headshell with two screws, spaced 1/2 inch apart.
U-mount Model Specifications:
- Frequency Response 20-20,000 Hz
- Channel Separation 24/15 (dB at 1 kHz/10 kHz)
- Vertical Tracking Force 1.0-1.5 grams
- Stylus Construction Bonded round shank
- Recommended Load Impedance 47,000 ohms
- Output 5.0 (mV at 1 kHz, 5 cm/sec)
- Channel Balance 1.5 dB
- Stylus Shape 0.7 mil conical
- Cantilever Carbon fiber
- Mount Universal