12 Pay $599

    Audio-Technica M3 Wireless Personal In Ear Monitor System

    Order your Audio-Technica M3 Wireless Personal In Ear Monitor System from AMS and enjoy 0% Interest Payment Plans, Free Shipping, Free Extended Warranty & 45 Day Money Back Guarantee.
    Sorry! This item is no longer available.
    Out of Stock:
    Product Description

    The Audio-Technica M3 lets you take your in ear monitor system to the next level by giving you tons of frequencies and the ability to add more me right at the body pack.
    Audio-Technica’s advanced M3 IEM system offers a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica’s versatile Personal Mix Control, which allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR and 1/4-inch combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

    Audio-Technica M3 Features

    • High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
    • 1321 selectable UHF channels with automatic frequency scanning
    • Up to 16 simultaneous systems per frequency band
    • Three receiver modes: Personal Mix, stereo, and mono
    • Personal Mix Control allows volume and mix control of two independent signals at the receiver
    • LCD information display offers step-through menus for setting preferences
    • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
    • Adjustable squelch eliminates annoying static
    • Pilot tone protects against RF interference when transmitter is turned off
    • Multi-level limiter (defeatable) helps protect hearing from sudden peaks
    • Portable system is quick to load and set up
    • Reduces on-stage audio clutter for better overall mix & less feedback
    • Use any number of Stereo Receivers (with individual mixes) on the same frequency
    • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
    • Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
    • Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

    Product Specifications

    Audio-Technica M3 Specifications

    Overall System Specifications

    • Operating Frequencies:
      • Band L: 575.000 to 608.000 MHz, 1321 frequencies
      • Band M: 614.000 to 647.000 MHz, 1321 frequencies
    • Minimum Frequency Step: 25 kHz
    • Modulation Mode: FM stereo
    • Maximum Deviation: ±40 kHz
    • Dynamic Range: 90 dB (typical), A-weighted
    • Total Harmonic Distortion: <1% at (1 kHz, ±20 kHz Deviation)
    • Operating Range: 100 m (300 feet), typical
    • Operating Temperature Range: -5° C (23° F) to +50° C (122° F)
    • Frequency Response: 60 Hz to 13 kHz (+/- 3 dB)
    • Simultaneous Use: 16 channels per band (maximum recommended)

    Receiver Specifications

    • Receiving System: Double conversion superheterodyne
    • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
    • Headphone Output Connector: 3.5 mm TRS stereo phone jack
    • Headphone Output Power: 65 mW (at 32 ohms)
    • Antenna Input: SMA-type, 50 ohms
    • Aux Input Connector: 3.5 mm TRS stereo phone jack
    • Batteries: 2 x 1.5V AA (not included)
    • Battery Life: 8 hours (alkaline)
    • Dimensions (W x D x H): 2.76 x 0.98 x 4.33 inches (70 x 25 x 110mm)
    • Net Weight: 133 g (4.7 oz), without batteries
    • Accessories Included: EP3 earphone; flexible antenna

    Transmitter Specifications

    • RF Power Output: 10 mW/50 mW (switchable), 50 ohms, Limited to 10 mW within 863 MHz to 865 MHz
    • Spurious Emissions: Following federal and national regulations
    • Input Connections: XLRF-type/6.3 mm stereo (1/4-inch) combination connector
    • Maximum Input Level:
      • XLRF-type/6.3 mm stereo, (1/4-inch) balanced: +26 dBu
      • 6.3 mm (1/4-inch) mono, unbalanced: +26 dBu
    • Loop Output Connector: XLRM-type connector
    • Power Requirement: 12-18V DC, 600 mA
    • Headphone Output Connector: 6.3 mm (1/4-inch) TRS stereo phone jack
    • Headphone Output Power: 120 mW at 32 ohms
    • Antenna Connector: BNC, 50 ohms
    • Dimensions W x D x H: 8.30 x 5.20 x 1.70 inches (210 x 132 x 44mm)
    • Net Weight: 930 g (32.8 oz), without accessories
    • Accessories Included: AC adapter (country dependant); rack mount adapters; flexible antenna
    Buy with Confidence
    All wireless microphone systems available through AMS are compliant with current FCC rules for safe operation without a license when they leave our warehouse. If you choose to modify a system after purchase, it may no longer be in compliance and may therefore require a license to operate. To learn more about the FCC’s rules regarding wireless microphones (which are subject to change), please call the FCC at 888-CALL-FCC (TTY: 888-TELL-FCC) or visit http://www.fcc.gov/encyclopedia/wireless-microphones.
    Helpful Info about the Manufacturer
    Phone:  330-686-2600 Warranty:  1 Year;
    2 Year on Headphones and In Ear Monitors;
    5 Year on 40 Series, Artist Elite, Broadcast and Production, Midnight Blues Series;
    Liftetime on ATR and Premium Cable
    Customer Reviews
    Currently there are no discussions available for this item.