Audix MB5055 MicroBoom with M1255B Condenser Mic Package

    Order your Audix MB5055 MicroBoom with M1255B Condenser Mic Package and enjoy 0% Interest Payment Plans, Free Shipping, Free Extended Warranty and 45 Day Money Back Guarantee.
    Sorry! This item is no longer available.
    Out of Stock:
    Product Description

    The Audix MB5055’s 50-inch carbon boom allows you to place a high output Audix M1255B mic (supplied with the MB5055) wherever you need exceptional coverage and unsurpassed audio fidelity. Equipped with an adjustable clutch for mic stand mounting, the laser thin carbon fiber boom is very light, very portable, and non reflective so that it never blocks the action even in video applications.


    • Lighweight, rigid
    • Portable, easy to position
    • Clean, elegant appearance
    • Exceptional sound quality
    • Attaches to any mic stand
    • Can be used horizontally or vertically
    The MB5055 was designed for choir or group vocal applications where you need to place the M1255B mic capsule high enough to capture the top tier singers, at stage front where there is minimal to no mic coverage, or for overhead micing at recitals and symphonic productions. The MB5055 MicroBoom combination provides fast and easy mic placement and uncompromised audio quality live or in the studio.

    Audix M1255B Condenser Microphone Applications:
    • Overhead mic for choir, group vocal
    • Acoustic instruments
    • Ambient room miking
    • Symphonic area miking
    • Speech, presentation, podiums
    • Cardioid pattern
    The MB5055 MicroBoom has complete immunity from RF interference caused by cell phones and GSM devices and the black matte finish minimizes glare in video applications. Requires 18-52 volts phantom power and ships with 25-foot cable (mini XLR to standard XLR connector), mic stand adapter mount and clutch, and windscreen.

    Product Specifications
    Audix MB5055 MicroBoom Specifications
    • Material Rod: Carbon Fiber
    • Gooseneck: Steel
    • Connectors: Brass
    • Length of MB50: 50 inches / 1270mm
    • Diameter: .20 inches / 7.4mm
    • Connectors:
      • Bottom: Mini-xlr male
      • Top: Mini-xlr female
    • Weight :
      • 2.5 ounces / 78 grams
      • 4 ounces / 111 grams
      • (without mic or clip)
    • Finish: Non-reflective black
    Audix M1255B Condenser Microphone Specifications
    • Transducer Type: Condenser
    • Frequency Response: 50 Hz - 19 kHz
    • Polar Pattern: Cardioid
    • Output Impedance: 150 ohms
    • Sensitivity: 32 mV / Pa at 1k
    • Signal/Noise Ratio (A-weighted) : 73 dB
    • Equivalent Noise Level (A-weighted): 21 dB
    • Maximum SPL at .5% THD: greater than 130 dB
    • Dynamic Range: 109 dB
    • Power Requirements: 18 - 52 volt phantom power
    • Connector: 3 pin mini-XLRm
    • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
    • Housing /Finish: Machined brass /Black Powder coat
    • Weight: 20 g / 0.7 ounces
    • Length: 54 mm / 2.1 inches

    Helpful Info about the Manufacturer
    Phone:  503-682-6933 Warranty:  5 years for dynamic microphones, 3 years for condensers and 1 year for all other products
    Customer Reviews
    Currently there are no discussions available for this item.