Behringer Multigate Pro XR4400 Processor

    The Behringer XR4400 Multigate Pro features 4 independent UTR expander/gate channels while completely eliminating clipped starts or chattering.
    Sorry! This item is no longer available.
    Out of Stock:
    Product Description

    The Behringer XR4400 Multigate Pro features 4 independent UTR (ultra transient response) expander/gate channels each with volume threshold and parametric frequency filters. This means the bass mic will not trigger the snare mic because the snare mic can be set not to respond to those bass frequencies. Behringer's superfast interactive circuitry completely eliminates clipped starts or chattering. 'couple' mode lets you operate channels independently or linked for stereo operation. Attack, hold and ratio controls are featured on each channel and led metering shows gate status and gain reduction. Servo-balanced 1/4" TRS and XLR connectors, 5-year warranty.

    Behringer XR4400 Features

    • 4 separate UTR (Ultra Transient Response) expander/gate circuits
    • Extremely short attack time (<10 µsec.)
    • Super-precise parametric side chain filter with monitor function
    • New FlexLink system allows flexible master/slave configurations
    • 80 dB maximum attenuation
    • Adjustable IAC circuit eliminates clicks, pops and flatter
    • Adjustable hold and release parameters
    • "Traffic light" display for threshold working point, gain reduction display
    • Servo-balanced inputs and outputs
    • XLR and 1/4" TRS connectors
    • Manufactured under ISO9000 certified management system

    Intelligent dynamic control
    BEHRINGER's MULTIGATE PRO XR4400 is a state-of-the-art 4-channel expander/gate. It combines four frequency-selective expanders/noise gates in a single rack space without compromising the least bit of functionality. With the MULTIGATE PRO, you've got a precision instrument that offers easy operation yet unbelievably powerful, flexible control possibilities. Noise is suppressed during quiet passages and crosstalk between microphones reduced. The MULTIGATE PRO is especially effective for complex microphone separation in drum-set miking.

    Technology – at your command
    Super-fast transients require extremely short attack times. Thanks to the new UTR (Ultra Transient Response) circuitry, transients are not colored by "cutting off" of their percussive attack phase.

    Completely in tune
    BEHRINGER has integrated a fully parametric filter into the side chain, allowing you to fine-tune the controlling signal. The result: the gate reacts only when you want it to. Which other expander/gate offers parametric filters?

    The FlexLink system: true to its name
    Each channel of the MULTIGATE PRO can be linked with its direct neighbor, allowing a multitude of various configurations: two true stereo gates, one stereo and two mono gates or even a three-way or four-way gate. Flexibility at its best.

    It's fun to be in control
    Varying program material and complex sustain phases require separate hold and release values in order to allow "inaudible" dynamic processing. This flexibility ensures that you can ideally adapt the control parameters to the signal at hand. With the MULTIGATE PRO XR4400, you 've got the perfect device for the quick and effective processing of your music.

    MULTIGATE® PRO XR4400: the ultimate 4-way expander/gate!

    Product Specifications

    Behringer XR4400 Specifications

    Audio Input

    • Connectors XLR and 1/4" jack
    • Type RF filtered, servo-balanced input
    • Impedance 50 kOhm balanced, 25 kOhm unbalanced
    • Max. Input Level +21 dBu balanced and unbalanced
    • CMRR typ. 40 dB, >55 dB @ 1 kHz

    Audio Output

    • Connectors XLR and 1/4" jack
    • Type electronically servo-balanced output stage
    • Impedance 60 Ohms balanced, 30 Ohm unbalanced
    • Max. Output Level +21 dBu, +20 dBm balanced and unbalanced

    System Specifications

    • Frequency Response 18 Hz to 30 kHz, +/- 3 dB
    • Noise > 95 dBu, unweighted, 22 Hz to 22 kHz
    • THD 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1
    • IMD 0.01 % typ. SMPTE
    • Crosstalk < -100 dB, 22 Hz to 22 kHz

    Gate Section

    • Type UTR (Ultra Transient Response) gate
    • Threshold variable (BYPASS to +10 dBu)
    • Attack program dependent
    • Hold variable (0 to 4 sec)
    • Release variable (50 ms to 4 sec)
    • Range variable (0 to -80 dB)

    Expander Section

    • Type IRC (Interactive Ratio Control) expander
    • Attack program dependent
    • Ratio variable (1:1 to 1:4)

    Side-Chain Filter

    • Frequency variable (100 Hz to 10 kHz)
    • BW (Bandwidth) variable (2.3 to 0.7 oct.)

    Function Switches

    • Monitor monitors the side-chain key signal
    • Filter activates the side-chain filter
    • Mode gate/expander switch
    • Couple activates the FlexLink function


    • “-” indicator signal is below threshold
    • “Hold” indicator signal reaches the threshold
    • “+” indicator signal is above threshold
    • Gain Reduction 8-segment LED display: 1/3/6/10/15/20/30/40 dB

    Power Supply

    • Mains Voltages
      • USA/Canada 120 V ~, 60 Hz
      • U.K./Australia 240 V ~, 50 Hz
      • Europe 230 V ~, 50 Hz
      • General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
    • Power Consumption max. 20 Watts
    • Fuse
      • 100 - 120 V ~: T 630 mA H
      • 200 - 240 V ~: T 315 mA H
    • Mains Connection Standard IEC receptacle


    • Dimension (H * W * D) app. 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm)
    • Net Weight app. 2.5 kg
    • Shipping Weight app. 3.5 kg

    BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

    Helpful Info about the Manufacturer
    Phone:  702-800-8290 Warranty:  1 Year (3 year when you register online at Behringer)
    Customer Reviews
    Currently there are no discussions available for this item.