The Eden WT800 Bass Amplifier Head; Number One with Eden fans for over a decade!
Proudly regarded by touring artists everywhere, Eden's hand-built WT800 bass amplifier utilizes the finest materials and highest quality controls available on the market today. Boasting an exceptional tone quality, the WT800 is a result of a marriage of traditional vacuum tube technology with the reliability of modern solid state devices. The Eden design philosophy is at the heart of their sonically superior hybrid design. Maximum reliability in the amplification of natural bass sound without unwanted sound coloration. Eden's WT800 represents no-compromise bass guitar amplification at its absolute best!
The upgraded WT800 version now boasts an improved cooling system and more power. Conservatively rated at 440 Watts (4 Ohms) per side with both channels driven, and 880W bridged into 8 Ohms and a whopping 1100 Watts bridged into 4 Ohms (with a minimum of 3dB of headroom), the WT800 models are still the perfect choice for the touring professional.
Eden WT800 Features
- Mono Bridge Interlock Safety Circuit
- Amplifier Output Fuses
- Switchable automatic compression
- Five-way semi-parametric tone control
- Electronic crossover
- Pre and post effect loops
- Stereo Aux inputs
- DI out with ground lift and Pre/Post EQ switch
- Headphone out
- Tuner out with Mute for silent tuning
- Thermostatically controlled fan
- Two Year Warranty
- Made in the USA!!
Mono Bridge Interlock Safety Circuit
When the amplifier is set to Bridge Mode operation, this circuit disconnects the Left and Right Outputs. This prevents accidental connection of the L/R outputs when in Bridge Mode. Now only the Bridge Mono Output will work in Bridge Mode.
Amplifier Output Fuses
Eden has added internal fusing to both amplifiers. In the event of catastrophic failure, these fuses protect speaker cabinets from damage. It’s not like this ever happened a lot, but on very rare occasions it has, and they wanted to give your speakers more protection.
Getting Technical About Eden Amplifiers
At the heart of the power section is Eden's massive toroidal transformer which provides the World Tour Series with more consistent regulation and sonic quality with less weight than traditional transformer design. For maximum rigidity and rejection of unwanted electromagnetic interference, Eden Amplifiers utilize a unique one-piece main chassis made from a single piece of heavy aluminum plate with 18 gauge steel chassis covers. Lock washers on all the screws prevent loosening from vibration, while on the job or on the road. In the unlikely event of an operational problem, Eden’s state-of- the-art modular electronic construction allows for easy repair and simple upgrades. All World Tour Series amplifier systems come standard with rack mount kits, easily selectable AC voltages for international use and a rock-solid two-year world-wide warranty.
Eden Electronics
Since their beginning as a custom builder for professional artists and manufacturers in 1976, Eden Electronics has had one goal in mind: To build the highest quality bass amplification equipment possible. Their goal is truly realized with the David Series Bass Enclosures and Professional Amplification. The key to Eden's success was the development of high quality, innovative designs, coupled with the best possible quality control through in-house manufacturing of all key design elements. Each component in the Eden David and World Tour Series is hand built and tested in their new factory complex.