Fuchs Plush Extreme Cream II Specifications
The Plush “Extreme Cream” pedal is a unique product, designed by Andy Fuchs. It uses a unique circuit topology which uses a combination of IC’s and selected FET’s, for lowest noise and the warmest tube like overdrive tones possible.The input impedance is 1-Meg, suitable for most any guitar or signal source. The output impedance is approximately 1-K, which is buffered, to drive long cables as well as subsequent effects.
The DC jack on the side is a standard 2.1 mm tip negative adaptor input. A Plush DC adaptor may be purchased from your local dealer or any standard Roland style (or similar) DC adaptor may be used. The output of the adaptor must be 9-Volts DC. Using this pedal with the incorrect adaptor may potentially damage the pedal, which will not be covered under warranty.
Battery replacement: To replace the battery, remove the four screws holding the rear cover in the unit. The battery should be replaced with a new premium quality 9-V alkaline battery. Battery life (depending on usage) should be approximately 6 months to one year. Battery not included.