Furman M8DX Merit X Series Power Conditioner Digital Meter And Lights

    Shop Furman M8DX Merit X Series Power Conditioner Digital Meter And Lights from AMS with 0% Interest Payment Plans and Free Shipping.

    See all items from Furman
    Product Description

    The eight switched outlets in the rear panel of the Furman M8DX Power Conditioner will power up and protect all your equipment up to a 15 amp load. The Furman M8DX Merit Series Power Conditioner is the perfect low cost AC power solution for any rack mount system. The Furman M8DX features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level. The M8DX power conditioner also features a bright red, three-digit LED voltmeter that displays incoming voltage.

    Furman M8DX Power Conditioner Features:

    • AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
    • Spike & surge protection ensures equipment stays safe and your power stays clean
    • 8 rear panel outlets and 1 front panel convenience outlet
    • Digital voltmeter display incoming line voltage
    • 15 amp rating, with circuit breaker
    • Front panel indicator LED lets you know that your equipment is being protected
    • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
    • Two retractable LED light fixtures with dimmer control for convenient rack illumination

    Instrument Rigs
    No need to worry about your rig going up in smoke! Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on, while the digital voltmeter lets you monitor incoming voltage.

    With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. You can even monitor voltage changes, as the digital meter allows you to keep an eye on the incoming line voltage. With a 15 amp capacity and nine total outlets, it's enough to power your whole home studio.

    DJ Equipment
    Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out. The dual pull-out front panel lights also let you discreetly see your board and gear without distracting from the show on the dance floor.

    Pro Audio
    When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. It keeps your equipment safe and sounding clean, while the digital voltmeter lets you monitor incoming voltage.

    Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

    Product Specifications

    Furman M8DX Specifications

    • Maximum Output Current: 15 amps
    • Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
    • Lamps: Two 120V incandescent bulbs, 4 watts each
    • Operating Voltage: 120VAC 60Hz
    • Spike Protection Mode: Line to neutral
    • Energy Dissipation: 170 joules
    • Peak Impulse Current: 12,000 amps
    • Maximum Continuous Opterating Voltage: 130 VAC RMS
    • Let Through Voltage (@ 125 amps, 8/20uS waveform): 400 volts
    • Noise Attenuation: Transverse mode: Greater than 26dB, 200Khz to 10 Mhz
    • Dimensions: 1.75 H x 19 W x 7.5 D inches
    • Weight: 5.8 lbs.

    Helpful Info about the Manufacturer
    Phone:  707-763-1010 Warranty:  3 Years
    william dantzler
    Product Rating brightstarbrightstarbrightstarbrightstarbrightstar
    Love it
    Product Rating
    What is your opinion of this product?
    Great, durable, just as advertised.
    Kevin Passow
    Product Rating brightstarbrightstarbrightstarbrightstarbrightstar
    Awesome bit of insurance for expensive gear
    What is your opinion of this product?
    I purchased the Furman MD8X as the power conditioner for a rack unit I'm building, and couldn't be happier with it. Definitely recommend to protect your expensive rackmount gear!
    Bryan Thompson
    Product Rating brightstarbrightstarbrightstarbrightstarbrightstar
    Works good
    What is your opinion of this product?
    Works well
    MSRP: $199.95
    Add to Wish List