Item #: JBL LSR6325P LIST

JBL LSR6325P Powered Studio Monitor

Shop JBL LSR6325P Powered Studio Monitor from AMS with 0% Interest Payment Plans and Free Shipping.
QTY
 
Have questions, found a better price? Talk to a sales specialist! 800-319-9043
Product Highlights

Product Description

The JBL LSR6325P Studio Monitor provides exceptional performance for use in applications where accuracy is a must, but space is limited. With a 5.25-inch high-excursion woofer, a damped titanium composite tweeter, and 150 Watts of amplification, the LSR6325P outperforms many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P is the heart of an exceptionally accurate yet space efficient full-range system. Price is for one speaker.

JBL LSR6325P Features

  • High Performance bi-amplified design with patented JBL Transducer Technology.
  • Front Panel Volume and Power Controls.
  • Integrated mounting points for horizontal and vertical suspension.
  • Titanium Composite High Frequency Device with Elliptical Oblate Spheroidal Waveguide.
  • Shielded for use next to Video Monitors.
  • Built in high pass filtering for use with optional subwoofer.
  • User selectable Workstation Boundary Compensation.
JBL Professional is a leader in the field of accurate studio monitoring. Their 4200 series, 4400 series, and LSR series provide a wide range of choices for music recording, broadcast and post production monitoring. JBL monitors utilize sophisticated design techniques and high performance materials, such as titanium, neodymium, kevlar, and carbon fiber composites to provide smooth, accurate sound reproduction.

The LSR Philosophy
The Linear Spatial Reference (LSR) philosophy is based on a set of design goals that carefully control the overall performance of the system in a variety of acoustic spaces. Instead of focusing on a simple measure such as on axis frequency response, LSR designs require much better control over dispersion via transducer selection and crossover frequency design. Critical decisions of image placement, EQ, balance and timbre are typically made within ±15° vertically and ±30° horizontally. This workspace is where the engineer, producer and artist make critical mixing decisions and this is the area that LSR is optimized for superb in room response. By incorporating LSR into the system design requirements, placement rules are relaxed, a more stable stereo image is maintained and off axis coloration is minimized.



CALIFORNIA PROPOSITION 65 WARNING
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
See all items from JBL

Shop Similar Models

Helpful Info about the Manufacturer
Phone:  844-776-4899 Warranty:  As of April 1, 2022, 7 year extended warranty. The extended warranty applies to all product components, excluding batteries, on the Eon 700 Series, Eon One Compact, Eon One MK2, and PRX One systems. Batteries on the rechargeable models will retain a 3 year warranty. 3 Years Amps and PRX700 and PRX800 Series; 2 Years Enclosures & Other; JBL Bags 1 year warranty

Product Specifications

JBL LSR6325P Specifications

    System
  • Frequency Response (+1, -2 dB): 70 Hz – 20 kHz
  • Enclosure Resonance Frequency: 55 Hz
  • Low Frequency Extension: User controls set to default
    • -3 dB: 65 Hz
    • -6 dB: 56 Hz
    • -10 dB: 48 Hz
  • Low – High Frequency Crossover: 2.3 kHz
    • 4th – Order Electroacoustic Linkwitz – Riley
  • Distortion, 96 dB SPL, 1 m:
    • Mid – High Frequency (150 Hz – 20 kHz):
      • 2nd Harmonic: <0.5%
      • 3rd Harmonic: <0.5%
    • Low Frequency (<150 Hz:
      • 2nd Harmonic: <2%
      • 3rd Harmonic: <3%
  • Maximum SPL (90 Hz – 20 kHz): >106 dB SPL / 1 m
  • Maximum Peak SPL (90 Hz – 20 kHz): >109 dB SPL / 1 m
  • Signal Input:
    • XLR, Balanced
    • RCA, Unbalanced
    • Passive voltage applied to XLR Pin 2 (RCA tip) produces outward woofer motion.
  • Calibrated Input Sensitivity:
    • XLR,+4 dBu: 96 dB/1 m
    • RCA, -10 dBV: 96 dB/1 m
  • Self Generated Noise Level: <10 dBA SPL/1 m
  • AC Input Voltage: 115/230 VAC, 50/60 Hz (User Selectable)
  • AC Input Voltage Operating Range: +/- 15%
  • AC Input Connector: IEC

    User Controls

  • High Frequency Control (3 kHz – 20 kHz): +1.5 dB, 0 dB, -1.5 dB
  • Workstation Boundary Compensation: Active & Bypass
  • Low Frequency Alignment:
    • 36 dB/Octave Butterworth high-pass at 40 Hz
    • 36 dB/Octave Bessel high-pass at 40 Hz
      (for use with subwoofer)
  • Variable Input Attenuation: 0 – 26 dB (9 dB at 12 o’clock)

    Amplifiers
  • Low Frequency:
    • Topology: Bridged Class A–B Monolithic
    • Sine Wave Power Rating: 100 Watts (<0.1% THD into rated impedance)
    • THD+N, 1/2 power: <0.05%
  • High Frequency:
    • Topology: Class A-B, Monolithic
    • Sine Wave Power Rating: 50 watts (<0.1% THD into rated impedance)
    • THD+1/2 power: <0.05%
  • Long Term Maximum System Power: 110 Watts (IEC 265-5)

    Transducers
  • Low Frequency:
    • Diameter: 134 mm (5.25 in.)
    • Voice Coil: 38 mm (1.5 in.)
    • Magnet Type: Ferrite with Integral Shielding
    • Cone Type: Tempered Paper with Butyl Rubber Surround
    • Nominal Impedance: 8 ohm
  • High Frequency:
    • Diameter: 25 mm (1 in.) diaphragm
    • Voice Coil: 25 mm (1 in.)
    • Magnet Type: Ferrite with Integral Shielding
    • Diaphragm Type: Damped Titanium Composite
    • Other Features: Elliptical Oblate Spheroidal Waveguide
    • Nominal Impedance: 4 ohms


    Physical
  • Finish: Smooth Dark Graphite
  • Grille: Black Steel Perforated
  • Enclosure Volume (net): 6.5 cu. liter (0.2 cu. ft.)
  • Low Frequency Vent: Dual Front Ported Linear Dynamics Aperture (Integrated with die-cast baffle)
  • Baffle Construction: Integrated with Die-Cast Aluminum
  • Cabinet Construction: Integrated with Die-Cast Aluminum
  • Net Weight: 7.7 kg (17 lbs.)
  • Dimensions (W x H x D): 17.3 x 26.9 x 24.1 cm (6.8 x 10.6 x 9.5 inches)
Notes:
All measurements unless otherwise stated made anechoically in a 4 environment at 2 meters and referenced to 1 meter by the inverse square law.

The reference measurement microphone position is located perpendicular to the center line of the low and high frequency transducers, at the point 70 mm (2.7 in.) above the center of the woofer.

Acoustic loading provided by the listening room increases Maximum SPL capabilities and low frequency bass Extension as compared to standard anechoic values.

Distortion measurements performed with the input voltage necessary to produce the stated A weighted SPL level at the stated measurement distance. Distortion figures refer to the maximum distortion measured in any 1/10th octave wide band in the stated frequency range.

JBL continually engages in research related to product improvement. New materials, production methods and design refinement are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.



Customer Reviews

stars
Rating distribution
  rating ratings

of customers
recommend
this product
of reviews
Review:

review date:
customer name:
Product Rating:
Recommend to a friend?
Verified Buyer:
review text:
Review:

review date:
customer name:
Product Rating:
Recommend to a friend?
Verified Buyer:
review text:
Reviews
Sort by:
Review:

review date:
customer name:
Product Rating:
Recommend to a friend?
Verified Buyer:
review text:
customer service response: response date:
merchant response text:

Related Items

Manuals & Docs