Item #: MOO MF101 LIST

Moog MF101 Moogerfooger Low Pass Envelope Filter Pedal

Shop Moog MF101 Moogerfooger Low Pass Envelope Filter Pedal from AMS with 0% Interest Payment Plans and Free Shipping.
Sorry! This item is no longer available.
Out of Stock:


Product Description

This is the classic Moog filter that changed the sound of electronic music. Reach out and sweep the filter with the CUTOFF knob. Or use the ENVELOPE section to do it automatically. Or plug in one or more expression pedals or control voltages to do it. Or do all three. This is the best-sounding, most playable filter you can have! A 110V power supply is included.

What is a Lowpass Filter?
A lowpass filter removes high frequencies from a tone. It makes the tone sound more mellow or muted. The lower the cutoff, the more muted the tone sounds. Imagine a window shade. As it is pulled down, it cuts out the higher light, then the light from the middle of the window, then finally all the light. A lowpass filter does the same sort of thing to the sound spectrum.

The moogerfooger filter is a direct descendant of the original Moog modular synthesizers. It contains two complete modular functions: a voltage-controlled lowpass filter and an envelope follower.

The envelope follower tracks the loudness contour (envelope) of a sound, and produces a voltage that follows the dynamics of your playing. Every time you play a note, the envelope voltage goes up and then down. The harder you play, the higher the envelope voltage goes. The envelope follower opens and closes the lowpass filter. Think of the envelope voltage as an invisible hand that turns the CUTOFF knob up and down every time you play a note. Since the envelope follows the dynamics of your instrument’s signal, you actually play the filter as you play your instrument.

The moogerfooger filter is also a resonant filter. As you turn up the resonance, the overtones near the cutoff frequency are boosted. Resonance gives the moogerfooger filter the same classic Moog filter sound as the Minimoog and Moog modular synthesizers.

The moogerfooger filter’s control parameters are signal mix, cutoff frequency, resonance amount, and envelope amount. All of the Lowpass Filter’s parameters can be controlled with expression pedals or external control voltages as well as by rotary panel controls. Panel switches select filter mode and envelope follower speed. 1/4 inch jacks are provided for audio input and output, pedal/control inputs and envelope follower output.

  • CUTOFF: A rotary control which varies the filter’s cutoff frequency over an eight-octave range
  • RESONANCE: A rotary control which varies the shape of the filter’s response, from pure lowpass to actual oscillation
  • ENVELOPE AMOUNT: A rotary control which adjusts the amount that the input signal’s envelope sweeps the filter cutoff frequency
  • MIX: A rotary control, which crossfades continuously from unfiltered to filtered audio
  • DRIVE: A rotary control which adjusts the gain of the audio input
  • SMOOTH-FAST: A rocker switch which chooses between smooth and fast envelope follower response
  • 2-POLE / 4-POLE: A rocker switch, which chooses between 2-pole (bright) and 4-pole (deep) filter frequency response
  • LEVEL: A three-color LED that is used to set the DRIVE control
  • ENV: A LED that indicates the strength of the envelope voltage
  • BYPASS: A two-color LED that tells whether the filter is on or bypassed
  • ON/BYPASS: A rugged, smooth-acting stomp switch
    Jack Panel Features
  • AUDIO IN: 1/4 inch phone jack - accepts any instrument-level or line-level audio signal from -16 dBm to +4 dbm
  • AUDIO OUT: 1/4" phone jack - -4 dBm nominal output level
  • CUTOFF, RESONANCE, AMOUNT, MIX: Stereo 1/4 inch jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from either two-circuit or three-circuit 1/4 inch jacks
  • ENVELOPE OUT JACK: Delivers the Envelope Control voltage for use by other voltage-controlled devices
  • 9V POWER INPUT JACK: Accepts standard 9 volt power adaptors (power adaptor included)

See all items from Moog Music
Helpful Info about the Manufacturer
Phone:  800-948-1990 Warranty:  1 Year

Product Specifications

Product Specifications

Moog Music MF101 Specifications

  • CASE: Black panel with hardwood sides - classic analog appearance
  • DIMENSIONS: 9 inches x 6 inches x 2-1/2 inches
  • NET WEIGHT: 2 lbs.
  • SHIPPING WEIGHT: 4 lb, including power adaptor and instruction manual
  • POWER REQUIREMENTS: 105-125 volt, 5W

Customer Reviews

Review: John Wise Submitted: 9/5/2018

Product Rating5 out of 5 stars.



Sad to see these go
Product Rating

Product Review

I love this pedal. The gain knob is really useful for creating a unique sound every time I plug in my guitar. And the CV expression inputs rock. I love how tweakable this pedal is, yet it remains bold and clear.


Related Items


Hosa CFS106 Guitar Patch Cable Molded Right Angle 6 Inch
Hosa CFS106 Guitar Patch Cable Molded Right Angle 6 Inch

MSRP: $5.45 Save: $2.00 (37%)

Ebtech HUM X Hum Eliminator
Ebtech HUM X Hum Eliminator

MSRP: $158.00 Save: $79.00 (50%)

Hosa ADC477 Universal AC Power Supply Selectable up to 12 VDC 1200 mA
Hosa ADC477 Universal AC Power Supply Selectable up to 12 VDC 1200 mA

MSRP: $29.25 Save: $12.30 (42%)

DiMarzio J06BK Guitar Instrument Jumper Cable 6 Inch Black
DiMarzio J06BK Guitar Instrument Jumper Cable 6 Inch Black

MSRP: $22.99 Save: $6.00 (26%)

Samson HP30 Stereo Headphones
Samson HP30 Stereo Headphones

MSRP: $39.95 Save: $15.00 (38%)

On Stage TCM9150 U-Mount iPad or Tablet Case
On Stage TCM9150 U-Mount iPad or Tablet Case

MSRP: $74.99 Save: $30.04 (40%)


Products that may interest you

You May Also Like

Manuals & Docs