An active monitor subwoofer package, the Eris E8 has optium clarity while the T8 Temblor subwoofer defines the low end. Mix your next recording with this outstanding Eris active monitor package. The Eris 8 package includes two Eris E8 2-Way active studio monitors and a PreSonus Temblor T8 active studio subwoofer.
PreSonus Eris E8
The ultra-affordable Eris E8 Monitor is designed to deliver a very accurate response with a tight bass and very clear upper end. That’s what you need in a home studio.
Thanks to well-designed Kevlar low frequency transducers, low-mass silk-dome tweeters, responsive Class AB amplification, and professional acoustic-adjustment controls, Eris delivers the goods.
PreSonus Eris E8 Powered Studio Monitor Features
When Size Matters
- 8-inch Kevlar low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 130 watt, Class AB biamplification
- Front-firing acoustic port for superior bass-frequency reproduction
- Midrange (±6 dB, continuously variable), HF (±6 dB, continuously variable), High-Pass (Off, 80 Hz, 100 Hz) and Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Optimized, resonance-suppressing internal bracing
- Balanced XLR/1/4-inch and unbalanced RCA inputs
- 105 dB maximum continuous SPL
For an extended low-frequency response and a bit more muscle, step up to the Eris E8. With its 8-inch, Kevlar low-frequency transducer, driven by a 75 watt, Class AB power amplifier, it can range down to 35 Hz. The E8 monitor can reach all the way to 22 kHz, thanks to a 1.25-inch (32 mm), silk-dome, high-frequency tweeter. However, the E8’s tweeter is driven by a heftier 65W, Class AB amplifier. With its extra juice, the E8 can deliver up to 105 dB SPL, peak.
The Eris E8 speaker has front-ported enclosures made of vinyl-laminated, medium-density fiberboard (MDF).
The Eris E8 powered studio monitor provides balanced XLR, balanced 1/4 in. TRS, and unbalanced RCA line-level inputs. When both balanced connections are in use, the TRS input will supersede the XLR input. The RCA input is summed into the signal path.
With this selection, you’ll have no problem hooking your Eris speakers up with virtually any line-level source. (If your signal source has unbalanced, 1/4 in. TS outputs, simply use a 1/4 in.-to-RCA adapter or adapter cable.
You’re in control!
Today’s music producers deal with a wide variety of musical genres and often work in more than one location. It’s easy to take your Eris speakers with you when you want to work in a different space. It’s almost as easy to customize their sound for your room and type of music. The most basic control is the Input Gain, which determines the signal level before it reaches the power amp. This is part of gain-staging your overall system—that is, setting the levels for every part of the recording chain in order to get the optimal level of clean audio all the way through. Once you’ve gain-staged your system, you can leave this control alone.
The Eris E8 provides three EQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors and even to broadly approximate the sounds of different types of speakers so you can hear what your mix might sound like, for instance, on a car stereo or portable radio. The Low control also is useful when using the E8 with a subwoofer.
In addition to the Acoustic Tuning controls, Eris speakers offer a three-position Acoustic Space switch. This switch controls a second-order, low shelving filter that cuts the level of all frequencies below 800 Hz by a specified amount (-2 or -4 dB) to compensate for the boundary bass boost that occurs when the monitor is placed near a wall or corner. If you don’t want to roll of those lows, set it to 0 dB.
This combination of controls lets you create a linear response for accurate monitoring and enables you to simulate different listening environments, so you don’t have to listen to mixes on your car, consumer computer speakers, and home stereo to check how the music sounds with different systems. Instead, you can adjust the Eris monitors’ response and test your mixes without leaving your studio. No other monitors in this price class offer this degree of control.
Any loudspeaker is subject to an assortment of environmental and performance problems, and Eris monitors offer protection from most common of these. RF shielding protects against radio frequencies that could be induced into the signal and become audible. (If you’ve ever heard a radio broadcast unexpectedly coming out of a guitar amp, that’s the result of RF interference.
Eris monitors also provide over-temperature protection to avoid heat-related issues, current-output limiting (to prevent damage should there be a short circuit on the speaker terminals), and subsonic protection to filter out extremely low-frequency vibrations that could interfere with the woofer’s performance.
Finally, Eris’ power amplifiers have a soft startup so that you don’t get damaging pops in the speakers when you power them up.
By now, it should be clear that Eris-series speakers deliver a lot more than you would expect from a budget-priced studio monitors. As you expect from PreSonus, they use quality components, are well constructed, and deliver professional audio quality. They’re lightweight and compact and look as professional as they sound.
But what really sets them apart from comparably priced systems are user controls that allow you to tailor the speakers’ response to your needs.
PreSonus Temblor T8 Subwoofer
To hear what’s really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor T8 from PreSonus lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
PreSonus Temblor T8 Active Studio Subwoofer Features
- 8-inch, downward-firing, glass-composite low-frequency transducer
- Round, rear-firing, bass-reflex acoustic port
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- 200 watt, Class AB amplification
- Left and right, balanced 1/4 inch TRS and unbalanced RCA main inputs
- Left and right, balanced 1/4 inch TRS and unbalanced RCA outputs
An ideal companion to Eris and Sceptre active reference monitors and Ceres BT-series active speakers, Temblor-series subwoofers complement full-range monitors without overshadowing them, extending the reach of your full-range system’s low end with a musical and natural approach.
Powerful and musical, Temblor features high-quality components and design that enable it to deliver fast and accurate transient response, extending low frequencies without a hint of 'tubbiness' or overshoot.
Suitable for personal studios, gaming, audiophiles, and home theaters, the T8 uses a downward-firing, 8-inch glass-composite driver with high-density rubber surround and a round, rear-firing bass-reflex acoustic port. Its 200W Class AB amplifier (100W RMS) delivers up to 104 dB SPL, with a frequency response of 30 Hz to 300 Hz.
The Temblor’s extensive user controls include input gain (-30 dB to +6 dB, continuously variable) and a continuously variable lowpass filter (50 Hz to 130 Hz) that let you create a seamless crossover transition between your full-range studio monitors and subwoofer for a more accurate listening environment.
A switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor’s outputs to the main monitors, avoiding destructive cancellation and reinforcement in the subwoofer’s upper range.
The result is a subwoofer that can be adjusted to perfectly complement not only the Sceptre, Eris, and Ceres BT active studio monitors but virtually any studio monitor.
Versatile I/O works with any setup
No other subwoofer anywhere close to the Temblor’s price range offers a comparable selection of inputs and outputs.
T8 Ins and Outs
The T8 provides two sets of inputs: left and right, balanced 1/4 inch TRS and unbalanced RCA main inputs. This enables it to pair well with PreSonus’ Ceres BT-series active speakers and home-stereo speakers, as well as personal-studio systems.
Similarly, the T8 offers left and right balanced 1/4 inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers. If you are using your subwoofer with a home stereo or home theater system or a smaller studio system that does not require XLRs or two subwoofers, consider the T8.