4 Pay Event

    PreSonus Eureka Recording Channel Strip Mic Preamp

    Order your PreSonus Eureka Pro Recording Channel Strip Mic Preamp and enjoy 0% Interest Payment Plans, Free Shipping, Free Extended Warranty and 45 Day Money Back Guarantee.
    Sorry! This item is no longer available.
    Out of Stock:
    Product Description

    The PreSonus Eureka is a professional recording channel strip containing a discrete class A transformer-coupled microphone preamplifier, Fet compressor, and three-band parametric equalizer.
    The microphone preamplifier features variable input impedance so that the Eureka can be matched and tuned for all types of microphones and recording applications. The Class A transformer-coupled microphone preamplifier also features Saturate which adjusts the drain current on the input Fet amplifier to simulate of the effects of tape saturation and tube warmth.

    The Eureka's ultra fast Fet compressor has both soft and hard knee compression as well as a separate make up gain stage and hi-pass side chain compression to deliver hard pumping to ultra transparent compression and everything in between. The Eureka's three-band fully parametric EQ gives you variable Q (bandwidth) on each band as well as an EQ pre COMP switch to put the EQ before the Compressor in the signal path. The equalizer has overlapping frequency selection on each band for total tonal control and shaping.

    The Eureka is loaded with microphone, line and instrument inputs so you can use it as a front end preamplifier for recording with microphones, guitars, keyboards, synths as well as a compressor/equalizer on a single channel during mixdown. The Eureka also has balanced send and return jacks so that you can insert your favorite outboard processor before the compressor/EQ to further enhance and customize your sound.

    The Eureka gives you the sonic performance and control you need in the real-world to produce professional quality audio that you, your customers and your fans deserve!

    PreSonus Eureka Recording Channel Strip Microphone Preamp Features

    • Class A High Headroom Transformer Coupled Microphone Preamplifier
    • Variable Microphone Input Impedance
    • Variable Saturate control (simulates tape saturation and tube warmth)
    • Fully Variable Compressor with Hi-pass Side Chain
    • Three Band Fully Parametric Equalizer
    • EQ Pre or Post Compressor
    • High Headroom Output Section
    • Very Low Noise Design
    • Internal Power Supply
    • Optional 24-Bit/192k Digital Output Card
    • Transparent, wide range performance

    Product Specifications
    PreSonus Eureka Pro Recording Channel Strip Microphone Preamp Specifications
    • Channels: One
    • Dynamic Range: >115dB
    • Headroom: +22dB
    • Frequency Response: 10Hz to 50kHz
    • Internal Operating Level: 0dBu = 0B
      Eureka Microphone Preamp
    • Gain: +12dB to +52dB
    • Noise Floor: -112dBu (+12dB gain)
    • EIN: -127dB
    • THD + Noise (0% saturation): <0.005%
    • THD + Noise (full saturation): <0.5%
    • Microphone Input Connector: XLR
    • Microphone Input Impedance (selectable): 2.5k, 1.5k, 600, 150, 50 Ohms
    • Instrument Input Connector: 1/4 inch TS
    • Instrument Input Impedance: 1 Meg Ohm
    • Send Connector: 1/4 inch TRS balanced/unbalanced
    • Send Output Impedance: 51 Ohms
    • Return Connector: 1/4 inch TRS balanced/unbalanced
    • Return Input Impedance: 10k Ohms
    • Metering (3-LED): -20dBu, 0dBu, Clip
    • Line Input (switchable): 1/4 inch TRS, 10k Ohm Input Impedance
    • Phantom Power (switchable): +48V (pin 1, pin 2 XLR)
    • Pad (switchable): 0dB/-20dB
    • Phase (switchable): 0, 180 degrees
    • Hi-pass filter (switchable): -3dB shelf at 80Hz
    • Threshold (variable): -40dBu to +20dBu
    • Ratio (variable): 1-10 (1:1 to 2:1)
    • Attack (variable): 0.1 to 200 ms
    • Release (variable): 0.05 ms to 3 S
    • Gain Make-up: -20dB to +20 dB
    • Hi-pass Side Chain Filter (variable): 10Hz to 10kHz
    • Metering: Analog VU (gain reduction / Output Level)
    • Low Band (+/-13dB): 20Hz to 300Hz
    • Mid Band (+/-13dB): 200Hz to 3kHz
    • High Band (+/-13dB): 2kHz to 20kHz
    • Q (variable all bands): Q=0.4 to 2 (3 octave to 2/3 octave)
    • Output Fader: -70dB to +10dB
    • Output Connectors: XLR balanced and 1/4 inch TRS balanced/unbalanced
    • Output Impedance: 51 Oms
    • Metering (output level): Analog VU (-20dBu to +6dBu)
    • Meter (gain reduction): Analog VU (-20dB to 0dB)
    • Output Headroom: +22dBu
    • Power Supply: Internally Regulated Linear Type
    • Power Requirements (factory configured): 100VAC to 120VAC, 200VAC to 240VAC
    • Size: 1U Rack
    • Dimensions: 19 x 1.75 x 7 inches
    • Weight: 8 pounds

    Helpful Info about the Manufacturer
    Phone:  225-216-7887 Warranty:  New Products: 1 Year. WorxAudio, AIR, and ULT loudspeakers: 6 years. B-stock: 90 Days.
    Customer Reviews
    Currently there are no discussions available for this item.