RCF ART710A-MK4 Active 1400 Watt 10" 2 Way Powered Loudspeaker

    Order your RCF ART710A-MK4 Active 1400 Watt 10" 2 Way Powered Loudspeaker from AMS and enjoy 0% Interest Payment Plans, Free Shipping, Free Extended Warranty & 45 Day Money Back Guarantee.

    See all items from RCF
    Product Description

    A unique product in its category, the ART 710-A MK4 has the performer's needs at the forefront of its design. The compression driver with custom designed dome and high power voice coil offers unique vocal clarity and sound projection. The 10” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalization, phase control, soft limiting and speaker protections.
    RCF ART7 MK4 rear panel

    1. IN/OUT CONNECTORS
    The amplifier presents both XLR In/Out connectors and a Jack input for the maximum connection versatility. double nomex layer

    2. SWITCHABLE EQ MODE
    A switchable EQ Mode makes it easier to select among two different equalisation presets:
    BOOST: extended response switch that slightly emphasizes the bass response for playback music and low volume applications;
    FLAT: linear response switch, when the speaker is used to amplify a live mix. The amplifier has a built in limiter circuit to prevent clipping or overdriving the transducers.

    3. MIC/LINE SWITCH
    A useful Mic/Line switch helps adjusting the input sensitivity. When used for speech, the [Mic] setting allows to use a microphone directly with the speaker. Set the selector to [Line] when using the speaker for live music or playback.

    4. VOLUME KNOB
    An easy to reach volume knob on the back allows to set the overall volume of the speaker according to its application. silicon surround structure

    5. STATUS LEDS
    3 status LEDs – Limiter / Signal / Status are provided for monitoring the system.

    Plug-n-Go
    The ART concept offers the best audio choice for a multitude of live sound applications in a plug‘n’go device. Just connect your microphone, your mixer or your audio device to the speaker and turn up the volume: there are no complex menus, no knobs to understand.

    Powerful Class D Amplifiers
    RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. Class-D amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the Art 7 series amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.

    APPLICATIONS
    • Compact live sound reinforcement
    • Portable PA
    • Frontfill and sidefill
    • Auditorium, Clubs, Ballroom, Corporate AV, Theatre
    FiRPHASE, A New Perspective on Linearity
    RCF speakers are designed by using FiRPHASE, a proprietary and advanced FIR filtering technology, conceived for delivering transparent sound, absolute clarity and perfect stereo images to the listener. The FiRPHASE algorithm optimizes dynamics, amplitude and phase patterns, ensuring at the same time minimum system latency.

    Phase Matters
    The design of the FIR filter for this specific purpose should start from an accurate measurement of the loudspeaker phase. The FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (Least Squared method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints. The algorithm corrects phase and amplitude (when necessary) by taking into account the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker. Despite the design perfection of our transducers and cabinets, we realize that the phase corrections are the “missing point” for the perfection. This technique allows a deep control of phase at mid-low frequencies with relatively small filters, reaching a higher resolution than that one as theory suggests.

    High Quality Transducers
    Woofers and compression drivers are precision built taking advantage of RCF’ s assembly technologies and a wealth of professional knowledge and experience dedicated to achieving extremely high standards.

    Red Dot Design Award
    Red Dot Design AwardThe RCF ART 7 Series has earned the prestigious international Red Dot Design Award in the Product Design category. Receiving the renowned Red Dot acts as proof of the excellent design achievements of professionals and up-and-coming talent alike, thus symbolising a seal of quality. With its outstanding and innovative design, the Art 7 Series has succeeded in one of the most renowned and most difficult international design competitions worldwide. High quality materials, precise manufacturing, careful assembly and extensive quality control procedures complete the groundbreaking design work of the RCF R&D team.

    Product Specifications
    RCF ART710A-MK4 Powered Loudspeaker Specifications
      ACOUSTICAL SPECIFICATIONS:
      • Frequency Response -3 dB: 60 Hz ÷ 20 Hz
      • Max SPL: 127 dB
      • Horizontal coverage angle: 90°
      • Vertical coverage angle: 70°
      • Compression Driver: 1", 1.0" v.c.
      • Woofer: 10", 2" v.c.
      INPUT/OUTPUT SECTION:
      • Input signal: bal / unbal
      • Input connectors: XLR male, Jack
      • Output connectors: XLR female
      • Input sensitivity: -2 dBu / +4 dBu
      PROCESSOR SECTION:
      • Crossover frequencies: 1600 Hz
      • Protections: RMS
      • Limiter: Soft limiter
      • Controls: Volume, Boost, Mic/Line
      AMPLIFIER SPECIFICATIONS:
      • Total power: 800 W PEAK
      • High frequencies: 200 W PEAK
      • Low frequencies: 600 W PEAK
      • Total power: 400 W RMS
      • High frequencies: 100 W RMS
      • Low frequencies: 300 W RMS
      • Cooling: Convection
      • Connections: VDE AC socket
      CABINET:
      • Cabinet Material: Composite PP
      • Hardware: 2xM10 flying p.
      • Handles: 1 top
      • Pole Mount/Cap: yes
      • Grille: steel
      • Color: Black
      PHYSICAL SPECIFICATIONS:
      • Height: 480/18.88 mm/inch
      • Width: 291/11.44 mm/inch
      • Depth: 276/10.86 mm/inch
      • Net Weight: 10.6/23.37 kg/lbs
    Helpful Info about the Manufacturer
    Phone:  (603) 926 4604 Warranty:  3 Years Parts and Labor
    Customer Reviews
    separator
    Manual
    Promotion8
    8 Payments! 0% Interest!
    8 Easy Payments! Limited Time!
    No Special Credit Card Application - 0% Interest! Your credit card will be billed in 8 equal payments, every 31 days, starting on the day your order is shipped. 8 Payment plan will need credit approval. Applies to new items only.
    Promotion12
    12 Payments! 0% Interest!
    12 EZ Payments! Ltd Time!
    No Special Credit Card Application - 0% Interest! If your order is between $999.00 and $4000, your credit card will be billed in 12 equal payments, every 31 days, starting on the day your order is shipped. 12 Payment plan will need credit approval..
    New
    New Item to American Musical Supply!
    0% Interest Payment Plans

    12 Payments of
    $99.84
    $599.00 - $1,198.00
    Add to Wish List
    Loading....