Rocktron Velocity 300 Guitar Rack Power Amplifier

    Order your Rocktron Velocity 300 Guitar Rack Power Amplifier from AMS and enjoy 0% Interest Payment Plans, Free Shipping, Free Extended Warranty & 45 Day Money Back Guarantee.
    Sorry! This item is no longer available.
    Out of Stock:
    Product Description

    Rocktron has been designing power amplifiers specifically for guitar players since the early 1990’s. The Velocity 300 is the latest in their line of Velocity power amps. The Velocity 300 provides 150 watts/channel when used in stereo applications or 300 watts mono bridged into an 8 ohm load!

    Rocktron Velocity 300 Guitar Rack Power Amplifier Features

    • 150 Watt channel in stereo applications
    • 300 Watts mono bridged into an 8 ohm load
    • Reactance circuit that replicates output impedance of tube amps
    • Definition controls
    • Automatic short circuit protection
    It has a unique “Reactance” circuit that actually replicates the output impedance of tube amplifiers—so you can get the same great sound that a tube amplifier delivers in a reliable solid state design, and because it is a variable control, you can customize your Velocity 300 to sound like any of your favorite tube amps. Best of all, this feature is available in the mono bridged mode too!

    In addition, the Velocity 300 has “Definition” controls to give you that little bit of edge you need to bring your playing out in the mix. It also has automatic short circuit protection, which detects problems and shuts down the amplifier before any internal damage can be done.

    Product Specifications
    Rocktron Velocity 300 Guitar Rack Power Amplifier Specifications
    • Output Power (Unbridged): 150 watts per channel at 4 ohms (both channel driven), 75 watts per channel at 8 ohms (both channels driven), 37.5 watts per channel at 16ohms (both channels driven)
    • Output Power (Bridged): 300 watts at 8 ohms, 170 watts at 16 ohms
    • Input Sensitivity: -7.3dBu (0.335V RMS), 4W stereo for rated output at max. gain
    • Maximum Input Level: 23dBu (10.95V RMS), input stage clip point
    • Maximum Output Level: 35dBu (4W bridged)
    • Maximum Gain: 36dB
    • Noise Floor: -75dBu typical (referenced to 1 watt)
    • Dynamic Range: 95dB
    • Distortion (Typical): 0.1% THD
    • Frequency Response: 20Hz - 20KHz, +0/-3dB
    • Current Consumption: 5 amps @115VAC max. (575 watts)
    • Selector Switch: 115/230 VAC voltage selector switch
    • Dimensions: 19x 1 3/4 x 9 1/2", 483 x 44 x 241mm
    • Weight: 18lbs, 7.80kg
    • Power: An AC power detect circuit, which ensures that the amplifier outputs shut down first when AC is removed. This will guard against any thumps or pops that could otherwise occur, potentially damaging speakers when power is cut to the amplifier.
    • Input Buffers: Differential input buffers to eliminate ground loop hum coming from the power amp.
    Helpful Info about the Manufacturer
    Phone:  616-968-3351 Warranty:  3 Years P&L on amps
    Customer Reviews
    Currently there are no discussions available for this item.