Item #: ROL UAS10 LIST

Roland Super UA USB Audio Interface

Sorry! This item is no longer available.
Out of Stock:
Product Description

The Super UA combines audiophile sound quality, premium build quality and low latency performance into a next generation audio interface for Mac and PC. With native support for both 1-bit DSD and 32-bit PCM playback, the Super UA is the state-of-the-art in fidelity. Low-latency drivers deliver smooth and efficient performance with your favorite DAW. And its all-metal build, sculpted controls and smooth LED metering make it a pleasure to use and beautiful to behold.

Roland Super UA USB Audio Interface Features

  • Audiophile sound quality with 1-bit DSD and 32-bit PCM playback
  • 4 in/4 out with Neutrik XLR and 1/4 inch connectors
  • All die-cast metal build with simple, solid controls and LED meters
  • Both 1/4 inch and 1/8 inch headphone jacks
  • Detachable design. Go mobile without having to disconnect studio mics and monitors
  • Recessed, illuminated buttons provide quick access to input and output volumes
  • Clean, quiet operation with stunning clarity and dynamic range
  • Low latency ASIO and Core Audio drivers
S1LKi sound
Whether you’re mixing and editing in the studio, or playing to sold-out crowds on the road, you need an interface that presents your music with stunning clarity and maximum impact. Roland's newly developed S1Lki DSP engine and high-resolution DAC support the latest high-resolution playback.

The Super UA’s high-end DAC supports 2.8MHz/1-bit DSD and 192kHz/32-bit floating point PCM playback - so you can experience the full resolution of your DAW’s 32-bit audio engine. Hear the most precise edits and subtle mix details. On stage it makes softsynths and backing tracks sound their absolute best, leaving a lasting impression on your audience.

Flexible design
Today’s musicians and producers are often on the go - composing in a hotel room, editing on a plane, or mixing at home. The Super UA was designed with the modern – and sometimes mobile – musician in mind. Its flexible design makes it feel permanent in the studio and yet easy to grab and go.

The Super UA consists of a main tabletop unit and a separate I/O module that connects with a single, sturdy cable. Connect your favorite mics and studio monitors to the I/O module’s locking Neutrik XLR connectors. The main unit sits neatly on your table while its recessed, illuminated buttons allow direct access to all four inputs, two sets of monitors, and two sets of headphones.

In addition to the large, OLED-ringed volume knob, the main unit has two integrated TRS ins and outs that provide convenient extra I/O in the studio. This also means it can easily travel with you, providing balanced high-quality I/O to go. Leave your mics and monitors connected in your studio and take the 2in/2out main unit with you on the road, to a gig, or anywhere life may take you.

Premium build
Build quality was a prime consideration when developing the Super UA. Roland wanted it to feel solid and reliable. So it’s made entirely of die-cast metal. It’s smooth, accurate jog-dial has just the right amount of reassuring click. It grips whatever surface it’s on and won’t slide around. And the smooth LED meters and ring encoder are bold and beautiful.

Power performance
While the Super UA was designed for audiophile-grade sound, it was also engineered for pro studio performance. Recording, mixing or playing live, you need reliable, low-latency operation with your favorite DAW and softynths. Roland’s expertise in hardware design and years of experience in audio driver development mean you can breathe easy while you sound your best.

Product Specifications
Roland Super UA USB Audio Interface Specifications
  • Number of Audio Playback Channels:
    • PCM format: 6 channels, 2 channels
    • DSD format: 2 channels
  • Number of Audio Record Channels:
    • PCM format:  2 channels
  • Signal Processing:
    • PCM format:
      • PC interface: 32 bits
      • DA Conversion: 1 bit, 32 bits
      • AD Conversion: 24 bit
      • Signal Processing:
    • DSD format:
      • PC interface: 1 bit
      • DA Conversion: 1 bit
  • Sampling Rate:
    • PCM format:
      • PC interface: 352.8 kHz, 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
      • DA Conversion: 3.072 MHz, 2.8224 MHz, 192 kHz, 176.4 kHz
      • AD Conversion: 192 kHz, 176.4 kHz
    • DSD format:
      • PC interface: 5.6448 MHz, 2.8224 MHz
      • DA Conversion: 2.8224 MHz
  • DSD Format Playback Method: DoP version 1.0
  • Interface: Hi-Speed USB
  • Main unit Connectors:
    • PHONES jack: Stereo miniature phone type, Stereo 1/4-inch phone type
    • LINE OUT A jack: Stereo 1/4-inch phone type, balanced
    • I/O connector (Breakout Box)
    • USB port: USB Type micro B
    • DC IN connector
  • Breakout box Connectors:
    • LINE OUT B jack: XLR type, balanced
    • MIC 1 jack, MIC 2 jack: XLR type, balanced, phantom power (DC 48 V, 10 mA Max)
  • Controller: MIC 1 button, MIC 2 button, LINE IN button, PHONES button, A button, B button Volume dial
  • Indicator:
    • Level indicator
    • Volume indicator
    • 48V indicator
  • Frequency Response:
    • 192.0 kHz: 20 Hz – 60 kHz (+0/-1 dB), 20 Hz – 90 kHz (+0/-5 dB)
    • 176.4 kHz: 20 Hz – 60 kHz (+0/-1 dB), 20 Hz – 80 kHz (+0/-5 dB)
    • 96.0 kHz: 20 Hz – 44 kHz (+0/-0.5 dB)
    • 88.2 kHz: 20 Hz – 40 kHz (+0/-0.5 dB)
    • 48.0 kHz: 20 Hz – 22 kHz (+0/-0.5 dB)
    • 44.1 kHz: 20 Hz – 20 kHz (+0/-0.5 dB)
  • Power Supply: AC Adaptor
  • Current Draw: 1,000 mA
  • Main unit Dimensions (WxDxH): 115 161 x 44mm (4 9/16 x 6 3/8 x 1 3/4 inch)
  • Breakout Box Dimensions (WxDxH): 136 x 65 x 42mm (5 3/8 x 2 9/16 x 1 11/16 inch)
  • Length of Breakout Box cord: 1.5 m 59-1/16 inches
  • Main Unit Weight: 490 g (1 lb 2 oz)
  • Breakout Box Weight: 360 g (13 oz)
  • Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adaptor, USB cable 1 m 3-1/3 inches
Helpful Info about the Manufacturer
Phone:  (323) 890-3700 Warranty:  M.I. Products: 1 year parts, 90 days labor
Instrument Amps: 3 years (1 year on speakers) parts, 2 years labor
Rackmount Power Amps & EQs: 3 years parts & labor
BOSS Compact Pedals: 5 years parts, 90 days labor
BOSS (other): 1 year parts, 90 days. labor
ep, MT, TL, E-Series: 1 year parts, 90 days labor
CPM-300 Powered Mixer: 3 years parts, 3 years labor
AC Adapters, Mech, Footswitches, Headsets: 90 days parts, 90 days labor
Sowseed777music, Sowseed777@yahoo.com Submitted: 1/9/2018
Product Rating brightstarbrightstarbrightstarbrightstarbrightstar
verified
Subject
"This is a sleeper"
Product Rating
What is your opinion of this product?
I'm mixing & mastering my wifes 17song Christmas Album with this. All i can say is ?? ?? ?? Great product, price, & AMS always makes any of your purchases an easy experience, ext warranty, especially with the payment option! Thanks for all your excellent service!
separator
Jerry Submitted: 11/6/2017
Product Rating brightstarbrightstarbrightstarbrightstarbrightstar
verified
Subject
Excellent Thanks AMS
What is your opinion of this product?
EXCELLENT UNITS I LOVE
separator
Discussions
Currently there are no discussions available for this item.
Related Items

Accessories

Raxxess Microphone Pop Filter
Raxxess Microphone Pop Filter

MSRP: $45.00 Save: $9.00 (20%)

$36.00
On Stage TCM9150 U-Mount iPad or Tablet Case
On Stage TCM9150 U-Mount iPad or Tablet Case

MSRP: $65.99 Save: $26.04 (39%)

$39.95
Hosa LBL466 LabelACable Cable Labels 60 Pieces
Hosa LBL466 LabelACable Cable Labels 60 Pieces

MSRP: $15.00 Save: $5.55 (37%)

$9.45