Shure GLXD24R/B58-Z2 Beta58 Handheld Wireless Vocal Microphone System

    Shop Shure GLXD24R/B58-Z2 Beta58 Handheld Wireless Vocal Microphone System from AMS with 0% Interest Payment Plans and Free Shipping.

    See all items from Shure
    Product Description

    Optimized for lead vocals, the GLXD24R/B58 handheld wireless system features exceptional clarity and seamless operation. GLXD24R/B58 provides intelligent battery rechargeability, robust RF performance, automatic frequency management and increased channel count. For use with GLX-D Advanced Frequency Managers (UA846Z2).

    Shure GLX-D Advanced Beta58 Handheld Wireless Microphone System Features

    • Operates in globally unlicensed 2.4 GHz spectrum
    • Optional GLX-D Frequency Manager allows operation of up to 11 systems
    • New antenna accessories for remote mounting and improved reception
    • Half-rack size and metal chassis
    • Rechargeable batteries deliver cost efficiency and up to 16 hours of runtime
    • Adjustable transmitter gain to optimize audio signal
    • Automatically moves away from interference without audio interruption
    • RF back-channel for remote control of transmitter functions
    • Automatic transmitter power-off to conserve battery life when transmitter is not in use 
    Includes GLXD4R rack mount receiver, GLXD2/BETA58 handheld transmitter with integrated BETA 58A supercardioid dynamic microphone capsule, microphone clip, SB902 rechargeable lithium-ion battery, USB charge cable, 2 detachable antennas, rack mount hardware, and user guide.

    Product Specifications
    Shure GLXD24R/B58-Z2 Beta58 Handheld Wireless Vocal Microphone System Specifications
    • Compatibility: Operate up to 9 compatible systems in typical setting, up to 11 maximum under ideal conditions
    • System Operating Range:
      • Indoors: Up to 100 feet (30 m) typical, with a maximum of 200 feet (60 m) under ideal conditions
      • Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m) under ideal conditions
    • Transmit Mode: Shure Propietary Digital
    • Audio Frequency Response: 20 Hz – 20 kHz Note: Dependent on microphone type
    • Dynamic Range: 120 dB, A-weighted
      • Latency Groups 1 and A: 4.0 ms
      • Groups 2, 3, 4 and B: 7.3 ms
    • RF Sensitivity: -88 dBm, typical
    • Total Harmonic Distortion: 0.2%, typical
    • RF Output Power: 10 mW E.I.R.P. max
    • Operating Temperature Range: -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
    • Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
    • Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
    • Battery Life: Up to 16 hours
    • NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment. 

    GLXD4R Rack Mount Receiver
    • Dimensions: 42 × 197 × 163 mm (1.7 × 7.8 × 6.4 in.) H × W × D
    • Weight: 907.2 g (32 oz.) without batteries
    • Housing: Steel
    • Power Requirements: 14 to 18 VDC (tip positive with respect to ring), 550 mA
    • Spurious Rejection: >35 dB, typical
    • Gain Adjustment Range: -18 to 42 dB in 1 dB steps
    • Phantom Power Protection: Yes
    • Audio Output:
      • Configuration XLR Output Balanced: 6.35 mm (1/4") output Impedance balanced
      • Impedance XLR Output 100 O: 6.35 mm (1/4") output 100 O (50 O, Unbalanced)
      • Full-Scale Output XLR LINE setting= +18 dBV, MIC setting= -12 dBV: 6.35 mm (1/4") +12 dBV
      • Pin Assignments: XLR Output 1=ground, 2=hot, 3=cold; 6.35 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=ground
    • Mic/Line Switch: 30 dB Pad
    • Receiver: Antenna Input
    • Impedance: 50 O
    • Antenna: Type ½ Wave Sleeve Dipole
    • Maximum Input Level: -20 dBm
    GLXD1 Bodypack Transmitter
    • Dimensions: 90.4 x 64.5 x 22.9 mm (3.56 x 2.54 x 0.90 in.), H x W x D (without antenna)
    • Power Requirements: 3.7 V Rechargeable Li-Ion
    • Housing: Cast Metal, Black Powdercoat
    • Input Impedance: 900 kO
    • RF Output Power: 10 mW E.I.R.P. max
    • Transmitter: Input
    • Connector: 4-Pin male mini connector (TA4M)
    • Configuration: Unbalanced
    • Maximum Input Level: (1 kHz at 1% THD) -8.4 dBV (7.5 Vp-p)
    • Antenna Type: Internal Monopole
    • Pin Assignments: TA4M
      • 1: Ground (cable shield)
      • 2: + 5 V Bias
      • 3: Audio
      • 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
    Helpful Info about the Manufacturer
    Phone:  800-257-4873 Warranty:  2 Years
    Customer Reviews
    separator
    0% Interest Payment Plans

    5 Payments of
    $129.80
    MSRP: $811.00
    Save:20%
    $649.00
    Please select a Model
    Add to Wish List
    Loading....