Studio Projects VTB1 Variable Tube Studio Mic Preamp

    Order your Studio Projects VTB1 Variable Tube Studio Mic Preamp and enjoy 0% Interest Payment Plans, Free Shipping, Free Extended Warranty and 45 Day Money Back Guarantee.
    Sorry! This item is no longer available.
    Out of Stock:
    Product Description

    The Studio Projects VTB1 is an outstanding, full-featured tube mic preamp at a knockout price!
    The Studio Projects VTB-1 is the ultimate in low cost mic preamplifier technology. Incorporating true class A/B switching, the VTB-1 is a totally discrete circuit. Unique to the VTB-1 is the "Tube Drive" - a variable drive to a 12AX7, that lets you blend as little, or as much of the Tube Drive as you want. This gives the VTB-1 the most flexibility of any mic preamplifier in it's price class - from a pristine solid state sound, to any combination of Tube Drive you choose... even hard distortion for guitars and bass! The Studio Projects VTB-1 is a real "must-have", and the perfect mic preamplifier for any microphone!

    Studio Projects VTB1 Features

    • 48 Volt Phantom Power
    • Phase Reverse
    • Variable Input Gain Control On Detented Pot
    • 1/4" D.I. Jack On Front Panel
    • High Pass Filter
    • Descrete Solid State Class A/B Design
    • TRS Insert
    • Mic/Line Switch
    • VariableTube Blend On Detented Pot
    • Meter Read Select Between Input and Output level
    • Switchable Impedance between 50/200 Ohm
    • 5 position LED metering
    • XLR mic input
    • Balanced outputs on XLR and 1/4"
    • External AC Power Supply For extreme Low Noise Operation (Included)
    • Output Gain Control On Detented Pot

    Studio Projects VTB1 Applications

    • A superb vocal mic pre with warm transparent character
    • Great for use as a Tube DI Box
    • Great for production, broadcast, and voice over work
    • Perfect for the professional and home project studio
    • A quality vocal mic preamplifier suitable for all vocal styles

    Product Specifications

    Studio Projects VTB1 Specifications

    • Maximum Gain:
      • Mic In to Balanced Out: 72dB (60dB preamp gain, 12dB output gain)
      • Line In to Balanced Out: 42dB (30dB preamp gain, 12dB output gain)
      • Distortion/Noise (THD + Noise):
        -20dBu input-mic; 0dBu input-Line; Both measured at +15dBu output
      • Mic or Line In to Balanaced or Line Out: <0.0015% (Blend set full CCW- no tube)
      • Mic EIN: -128dBu (150 ohm source, 60dB gain)
    • Frequency Response (20-20kHz, ref 1kHz):
      • -20dBu input, +15dBu output Mic In to Bal Out: +0 /-0.25 dB
      • 0dBu input, +15dBu output Line In to Bal Out: +0 /-0.5 dB
    • Phase Response (20-20kHz, either input): <+/- 15 degrees
    • Input Impedance:
      • Mic Input (Rear switch in 200 ohm position): 2000 ohms
      • Mic Input (Rear switch in 50 ohm position): 300 ohms
      • Line Input (Front panel TRS jack): 1.5 meg ohms
    • Output Impedance:
      • Male-XLR Balanced Output: 100 ohms (50 ohms each leg)
      • TRS Line Out: 300 ohms (Impedance Balanced)
    • Insert Jack (TRS):
      • Nominal Level: Approx 0dBu
      • Located between SS preamp stage and tube/output stage
      • Tip=Send: 50 ohms output impedance
      • Ring=Return: 7500 ohms input impedance

    For the Best Tube-Sound Results
    The VTB1's tube operates best when provided with a solid signal. The best way to accomplish this is to use the on-board metering to set the internal levels. Press the Meter Select switch IN, the meter will now display the signal level within the preamp, just before the tube stage. Adjust the GAIN control to get a meter reading within the 0 to +8 range. With the OUTPUT control at "0", start turning the BLEND control clockwise until the desired sound is heard. Depending on the source material, more or less BLEND will be needed. If the output level is too high or low for your following equipment, adjust the OUTPUT control to compensate. This won’t change the sound of the blended signal, just the overall level.

    Helpful Info about the Manufacturer
    Phone:  Warranty:  Warranty: 3 years
    Customer Reviews
    Currently there are no discussions available for this item.