Item #: VOO PPM LIST

Voodoo Lab Pedal Power MONDO Isolated Power Supply

Shop Voodoo Lab Pedal Power MONDO Isolated Power Supply from AMS with 0% Interest Payment Plans and Free Shipping.
{{photo.altTag}}
QTY
{{option.InternalDesc}}:
customer care To talk to a sales specialist! 800-319-9043
Product Highlights

Frequently Bought Together

+ + =
Current item:

Product Description

Pedal Power® MONDO is a high current-capable power supply designed to power the largest and most diverse pedalboards. From digital power-hungry effects from Strymon, Eventide, Line 6, TC Electronic and more—plus compatibility with all standard 9-volt battery stompboxes--MONDO is perfect for large to gigantic pedalboards. With 12 completely isolated, filtered, and regulated output sections, MONDO will keep your pedals dead quiet and sounding their best.

Pedal Power MONDO is also equipped with an internal thermometer that controls a silent fan keeping the unit cool even under the most adverse heat conditions of outdoor festival stages. Even with poor AC line conditions, it delivers clean, consistent power. Handmade in the USA using the finest components, Pedal Power MONDO was designed to meet and exceed the needs of our most demanding professional users.

Voodoo Lab Pedal Power MONDO Isolated Power Supply Features
  • 12 total isolated outputs
  • Four (4) 9V 100mA outputs switchable to 12V
  • Two (2) 9V 250mA outputs switchable to 12V
  • Two (2) 9V 100mA outs with SAG feature to simulate the output of a low battery
  • Four (4) 9V 400mA outputs (2 with 12V option)
  • Powers Strymon, Eventide, Line 6, TC Electronics, and more
  • All outputs compatible with all 9V battery operated pedals
  • Combine outputs for 18V/24V operation and currents up to 800mA (doubler cables sold separately)
  • Linear regulation and toroidal transformer for lowest possible noise
  • 200-watt courtesy AC outlet for powering additional devices
  • Power Cables included
  • Product Dimensions: 10.75" wide x 3.4" deep x 1.75" tall (273 x 86 x 44 mm)
  • Product Weight: 2.9 lbs. (1.32 kg)
  • Hand-built in the U.S.A.
  • 5-year warranty
Isolation
Ground loops cause hum and the solution is to break the unwanted ground path. Isolation is the best way to do it. Unlike many power supplies, Pedal Power isolates every output. This eliminates tone-robbing interaction between other effects. Pedal Power powers everything from vintage overdrives to modern digital marvels in a way other power supplies simply can't.

Proprietary Balanced Transformer
Typical transformers, like those used in a wall wart, create large magnetic fields that cause hum in any audio path near it. Pedal Power uses a custom designed, ultra-low noise toroidal transformer with separate balanced windings for every output allowing even the most sensitive pedals to be dead quiet.

Linear Power
What's good for charging a cell phone is NOT good for your pedals. While digital switching power supplies are small and inexpensive, they also generate noise. Pedal Power uses an audiophile quality linear supply for consistently stable, clean, pure power.

PEDAL POWER MONDO OUTPUT FEATURES (right side)
    9V/12V Standard Outputs (x4 - Outputs 1 through 4)
    Each of these four 9V 100mA outputs powers any standard 9V battery-operated pedal. 12V operation can be selected with DIP switches set AWAY from NORMAL on the bottom panel of Pedal Power 2 PLUS.

    9V High Current Outputs (x2 - Outputs 5 & 6)
    These outputs deliver 250mA for use with higher-current effects. Standard 9V battery-powered effects can also safely power from these outputs. As with outputs 1 through 4, 12V operation can be selected with DIP switches on the bottom panel set AWAY from NORMAL.

    9V Standard Outputs with SAG Control (x2 - Outputs 7 & 8)
    These function as standard 9V 100mA outputs when DIP switches are set in the NORMAL position. With DIP switches set AWAY from NORMAL, the SAG controls above outs 7 and 8 are now engaged. These controls enable variable voltage between 9V and 4V. This feature is useful to simulate a low battery in transistor-based fuzz, Octavia, and distortion circuits. For use with digital pedals like delay, chorus, and reverb, the SAG feature should be turned off.

HIGH CURRENT OUTPUT SECTION (left side)
    9V 400mA Outputs (x4)
    These outputs are available for powering high current digital effects. Two of these outs feature a 12V option. Standard battery-powered effects can also be powered using these outputs.

     Higher Voltages and Current Supply
    The voltages of any two isolated outputs can be combined using a Voodoo Lab Voltage Doubling Cable. Joining two 9V outputs creates a single 18V out. Joining two 12V outputs creates a single 24V out. The current of two isolated outs can also be combined using a Current Doubler Adapter for currents of up to 800mA.


CALIFORNIA PROPOSITION 65 WARNING
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
See all items from Voodoo Lab

Shop Similar Models

Helpful Info about the Manufacturer
Phone:  800-986-6696 Warranty:  5 Years

Customer Reviews

stars
Rating distribution
  rating ratings

of customers
recommend
this product
of reviews
Review:

review date:
customer name:
Product Rating: {{review.OverallRating}} out of 5 stars
Recommend to a friend?
Verified Buyer:
review text:
Review:

review date:
customer name:
Product Rating: {{review.OverallRating}} out of 5 stars
Recommend to a friend?
Verified Buyer:
review text:
Reviews
Sort by:
Review:

review date:
customer name:
Product Rating: {{review.OverallRating}} out of 5 stars
Recommend to a friend?
Verified Buyer:
review text:
customer service response: response date:
merchant response text:

Manuals & Docs