A portable and powerful interface and field recorder, the IK Multimedia iRig Pro Quattro I/O is a multi-purpose powerhouse ready to take on any audio challenge! is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.
Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!
iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone AD/DA converter, mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.
IK Multimedia iRig Pro Quattro I/O Audio Interface Features
-
Professional mobile recording interface/mixer
-
4 x XLR - 1/4" combo inputs with phantom power
-
2 x RCA, 3.5mm line in + MIDI In/OUT
-
Built-in microphone and limiter
-
Multi-track, stereo or mono operation
Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere:
-
As a mobile interface
-
Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a fu
ll array of inputs and outputs so you’ll always be prepared for any recording or need.
-
As a broadcast / podcast interface
-
Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favorite videos easily.
-
As a field recording interface
-
With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.
-
As a stand-alone mixer
-
It’s also possible to use the iRig Pro Quattro I/O as a preamp and mixer: just power it thru battery, USB or DC IN and use the full set of inputs/outputs to capture professional audio on your DSLR camera. When in STEREO and MONO mode, DAW inputs 3 and 4 are used as safety channels: this means that it is possible to record the same signal present on DAW input 1 and 2 but reduced by 12dB as a backup in case the sound source gets loud unexpectedly and causes the main channel to distort.