The Kemper Profiler Amplifier Guitar Amp Modeling Processor
is an entirely new and groundbreaking concept for guitar amplification using digital technology. The Profiling Amplifier is the result of Kemper’s belief that every guitar player should be able to transfer their personal signature sound into a single lunchbox-format amplifier.
The Kemper Profiling Amplifier processor digitally captures the sonic fingerprint of virtually any guitar amp. The days of struggling to reproduce that magic mic position in front of the speaker cabinet are over. Now you can have a profile for every combination of tones and settings your tube amp setup provides. The Kemper Profiling Amplifier offers a convenient and accurate A/B comparison mode so you can be sure that all your profiles are just like the original amp.
If you have used some great-sounding, well-maintained vintage tube amps in the studio, you can create profiles from these amps to use anywhere you like, at any time. Profiles can be spiced up with the Kemper Profiling Amplifier’s included professional quality effects; you can save variations with alternative amp settings, and you can exchange the cabinet simulation within a Profile at any time.
Kemper Profiler Amplifier Guitar Amp Modeling Processor Features
Great for Gigging
- Digitally captures the sonic fingerprint of virtually any guitar amp
- A/B comparison mode for comparing the original amp sound with the profiled sound
- Standard Gain, Bass, Middle, Treble and Presence controls
- Exchange profiles through the official Kemper Amplifier website profile exchange, emails, or other online forums and services
- Cabinet section enables you to mix and match head and cab profiles in which ever way you like
- 4 independent stomp effects slots can host effects including famous overdrives and distortions, compressor, reverb, several delays and LoFi algorithms, and a beautiful rotary speaker emulation
- Accurate models of classic effects such as a variety of chorus, phaser and flanger pedals
- External effects loop which you can patch in anywhere among the virtual stomps boxes
- Gain control ranges over 80dB and features an automatic volume compensation for clean settings
- several ground lifts to allow you to easily deal with possible hum and grounding problems
Do you plan on touring? Simply dial up your Profiles from the studio session when you play live. Instead of having to risk bringing a truckload of rare and fragile vintage amps to the gig to get your sound, now you can profile your amps before the tour, and just bring the Kemper Profiling Amplifier processor with you on the road! The Kemper Profiling Amplifier guitar amp modeler gives you what generations of guitar players have been waiting for: the ability to have your sound anytime, anywhere.
What is Profiling?
‘Profiling’ is what Kemper has named their proprietary technology that captures the sound and feel of a specific tube amplifier. In other words, the Kemper Profiling Amplifier doesn’t simply give you a list of static digital amplifier reproductions. Instead, profiling creates a vivid, living, dynamic and multi-dimensional image of your existing tube amp.
Profiling is as simple as plugging your tube amp into the Kemper Profiling Amplifier processor and pressing ‘record.’ Just insert the Kemper Profiling amplifier into the recording chain and it will do its magic. Test signals will be sent from the Kemper Profiler Amplifier guitar amp modeler into your tube amp and recorded by the microphone in front of your cabinet.
You don’t even have to play your guitar. After less than a minute the Kemper Profiling Amplifier acquires the sonic DNA of your tube amp and offers you the resulting custom profile. You can then use the A/B comparison mode to compare original tube amp sound with the profiled sound for a fast and convenient way to make final tweaks to the profile to get it exactly right.
The Kemper Profiling Amplifier includes the standard Gain, Bass, Middle, Treble and Presence controls that you would expect from a guitar amplifier. However, in contrast to many vintage amps, Kemper has kept the gain control neutral, so you are able to find the sweet spot of your amp, and run this optimal sound at any gain level.
Now, imagine if you could change the sonic character of a profile way beyond what’s possible with the amp itself. What if you could change the sonic age of the amp, or the bite of the pick? What if you could modify the power supply of your profiled amp in order to benefit from power sagging or be larger than life? With the Kemper Profiling Amplifier guitar amp processor, you can!
Kemper allows you to dynamically adjust key aspects of your favorite amps which would otherwise be impossible or require hardware modifications. You can do anything from minor tweaks, such as making your Marshall Bluesbreaker profile sound a bit more vintage, to more radical changes such as adding some modern high gain chunk to your vintage Fender Bassman.
Control way beyond the usual:
The Amplifier Section
- The Amp Definition parameter determines whether the Profile leans more towards a vintage or modern character. Increase this parameter to intensify the touch response of the virtual tubes.
- The Power Sagging parameter lets the tubes breathe with your playing; damped strings will have more ‘chug,’ and clean, picked notes will cut through better when you reduce your playing volume.
- The Pick parameter controls the attack of your pick independently of the gain setting-even through heavy distortion. This innovative parameter lets you decouple your pick sound from the natural compression of the distorting tubes and cut right through the mix.
- The Amp Compressor will sustain the clean guitar when you play soft, but lets the distorted sound through, unprocessed, when you revert back to normal playing volume.
- The Cabinet Voicing parameters give you access to the guts and the character of the cabinet. You can change the size of your virtual cabinet, tune the bass resonance or control the tonal character in a creative way.
At the heart of the Kemper Profiling Amplifier is the Amplifier section. The sound of the amp is based on the profile loaded into the rig. A great selection of intuitive and powerful macro parameters empowers you to perform modifications which are impossible with a traditional hardware amplifier.
The Equalizer Section
The Kemper Profiling Amplifier processor is equipped with a traditional bass/mid/treble/presence equalizer similar to what you already know and love from many amp heads. Many equalizers used in the tone stack section of more or less famous amplifiers lack of grip and blur your sound in an unnecessary fashion.
The Cabinet Section
The Kemper Profiling Amplifier captures the cabinet as a part of a profile. Thanks to digital alchemy this amp modeling processor can distinguish in between the cabinet and the amp head within a profile and therefore enable you to mix and match both in which ever way you like. Imagine you can exchange cabinets freely in between amps, even though those amps were combo amps before.
The Stomp Boxes
The Kemper Profiling Amplifier offers 4 independent stomp effects slots which can host a full arsenal of stomp box effects including painstakingly modeled famous overdrive and distortion stomp boxes, compressor, reverb, several delays and LoFi algorithms, and a beautiful rotary speaker emulation.
Kemper has also created accurate models of classic retro modulation effects such as a variety of chorus, phaser and flanger pedals. In the creative department are sonic decimators such as bit- and sample-rate reducers and a ring shifter, among many others. All stomp effects can be edited and copied conveniently between presets. And for your overview and convenience, Kemper used color coded LEDs indicating which type of stomp has been used per slot.
Looping In and Out External Effects
The Kemper Profiling Amplifier includes an external effects loop which you can patch in anywhere among the virtual stomps boxes. The location and other details can be stored per rig. The monitor outputs also can serve as a pure analog buffer amp for re-amping.
The Master Section
The master effects section of the Kemper Profiling amp modeler features reverb, delay and additional slots for stomp boxes and studio effects to refine your amplifier’s tone. The six knobs on the front panel offer convenient access to the most important settings. The reverb section features a dense and lively reverb algorithm which won’t mask the original signal. The delay section features several tape and stereo delay algorithms which can be synched to MIDI clock.
The Input Stage
Thanks to a Hi-Z input optimized for passive guitar pickups, the Kemper Profiling Amplifier offers a crystal clear signal path. Kemper uses only professional-grade analog components to ensure that your guitar tone remains unchanged.
Kemper includes a single-knob smart noise gate on the front panel that is completely transparent. It’s faster than any other noise gate you will experience and doesn’t need an adjustment of the release time. Damping a string results in immediate silence.
The Output Stage
The Kemper Profiling Amplifier modeler features two independent main outputs which can be used in multiple ways. The mains feature a balanced studio level connection and a parallel pair or TSRs. The monitor output optionally provides the amplifier’s sound without the cabinet. This proves beneficial for musicians with an existing power amp/cab on stage.
Browse Rigs and Perform
The Kemper Profiling Amplifier comes with two play modes. The Browser mode assists you in quickly finding the right rig thanks to its sophisticated sort and search functions. The Perform mode arranges your rigs according to the set list you’ll play tonight. Perform mode focuses on overview - think of a Performance like a lead sheet which allows you to collect, order and name all the rigs you need for a certain song.
The Kemper Profiling Amplifier guitar amp modeler makes it easy for you to share your personal library with other users. Rigs and Profiles are small files which include your name and numerous other details which can be used to filter and search for a specific rig. You can then exchange profiles either through the official Kemper-Amplifier website profile exchange, emails, or other online forums and services. The Profiler is equipped with intuitive search and filter functions allowing you to maintain a great overview of the growing library of custom profiles and rigs from around the globe.
Analog endless potentiometers
The analog endless potentiometers offer the best of both worlds. They provide the smooth feel and high resolution of an analog pot, yet are as intuitive to use as a rotary encoder. Need to increase a value? Simply turn the knob to the right - no need to worry about the current position. You have precise control over your sound, yet can still make extreme value changes with a single rotation.
LED color code
The status lights of the stomp boxes and effects on the front panel of the Kemper Profiling Amplifier processor can change their color depending on the category of effect chosen. For instance, distortion effects are red, compressors are represented by a turquoise LED. You can literally just look at the Profiler without reading the display and you already know which stomp boxes shape the sound.
The Kemper Profiling Amp offers multiple undo and redo steps so you can always return to a previous stage. It also introduces the concept of snapshots. Snapshots are backups of entire rigs and those are automatically generated for everything that would be lost otherwise. For instance, a snapshot is created when you store over an existing rig. This way you can go back to what you’ve overwritten earlier on at any point in time.
The Lock Button
Lock allows you to secure a certain aspect of a rig against overwriting. There are many applications for the Lock function:
- Keep the amp section unchanged while browsing through the effect settings of the presets. Or the opposite: Keep the effects while browsing through the amp settings of the presets. Lock a compressor stomp in the stomp section for every preset, as long as you want. Make individual settings (gain, noisegate) for two or three guitars in the input section, that remain unchanged when you change presets. Switch off delay and reverb on every preset for a day in a studio, where you might use outboard equipment.
- Copy and Past are designed to copy stomp boxes in between slots or rigs. In fact you can pretty much copy everything between every logical destination -it doesn’t matter if it’s a stomp box, a rig or a performance.
Profiler Remote is the quintessential foot controller for your Profiler. We’ve spent a tremendous amount of time to create a versatile and yet easy to operate floor board. The tight integration in between Profiler and Remote allows you to control, administer and program without any knowledge about MIDI or delving through cryptic data sheets.
The large, illuminated display is designed to be looked at from a distance and Remote's housing is built like a tank. Just what the doctor orders for touring musicians on dark stages.
Five buttons allow you to directly access five different programs ("Rigs") and entire performance programs can be switched using a bank system. There are dedicated buttons to access the tuner, tap tempo in and enable the new, exclusive Looper Effect.
Remote connects via a single Ethernet cable to your Profiler. No extra power supply in needed and the included cable is 7 meters long (21ft). Longer cables are possible as well.
Up to four continuous foot pedals can control multiple parameters inside your Profiler. Four buttons switch of stomps and effects. The programming required is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.