Add the Laney IRT-X Ironheart to your guitar set-up and experience the best guitar sound of your playing days! The IRT-X’s Electro/Mechanical Reactive Linking (ERL) offers you tonal options previously unavailable for YOUR tone.
Simply connect the IRT-X to your amp’s output section before the speaker, and it mimics the electronic and mechanical interaction between them at FULL RANGE! This means you get more punch, power, dynamics, highs, lows, clarity and definition. The Laney IRT-X is not an extension cabinet – it’s a 200-watt RMS powered EXPANSION cabinet!
The key is – Electro- Mechanical Reactive Linking (ERL)
Unlike an extension cabinet – which sits after your output section, the IRT-X sits between your amps output section and your amps speaker and cleverly mimics the response characteristics of your on-board speaker.
Unlike most guitar speakers, which are commonly, rolled off above 4Khz the IRT-X houses a high quality flat response 8 inch Driver and a 1 inch Compression Driver. As soon as you connect the IRT-X, YOUR guitar tone has the capability for far more highs and lows, which means more tone!
Used in its most straightforward application the IRT-X gives you more of your tone! And since it’s your tone what better than to use it as your own personal guitar monitor on stage – every gigging musician has run into problems hearing themselves on stage.
Your tone on stage
The IRT-X gives YOU the solution to hearing YOUR own tone on stage. Better tone that you can hear – it’s a win-win situation!
The best signal path
Guitar players love effects but sometimes they can get in the way of your tone – the best tone is the simplest tone.
Plug your effects into the IRT-X and you get all the benefit of your unadulterated guitar tone – with effects only in the IRT-X giving you a Wet/Dry set up.
When more really does mean more
The IRT-X can be scaled up to fit even the biggest rigs, with 2 IRT-X’s you can run true W/D/W rigs with amazing sonic implications. The IRT-X has a super compact footprint which means you can have a massive sound on even the smallest stage
The IRT-X comes equipped with an XLR DI out which can be sent directly to the PA and provides either a completely dry signal, or can be cabinet emulated – with or without FX! Emulation options include Dry, 1×12 or 4×12, so there is no need to use a mic and stand, which on a tight stage is great news. The on-board DI also means you get the same great tone night after night without relying on mic placements!
DSP Modeling setup?
The use of hi tech modeling setups requires some specific considerations when it comes to amplification. The IRT-X is ideally suited to pairing with a modeling processor or DSP based DAW package as the IRT-X has a completely flat, full range frequency response. Meaning your carefully modeled signal path in not re-EQ’d during the amplification process.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.