The Xotic XW-2 is a refined wah pedal design with an emphasis on “Maximum Tone with Minimal Fiddling”.
The wah tone and EQ are dialed in to perfection making accessing the perfect wah sound easier than ever. With plug-and-play simplicity, you can achieve the finest wah sound that will truly elevate your creative ingenuity. The pedal features custom wound inductor, pot and circuit which not only captures the pure essence of vintage Clyde McCoy (as XW1 did), but also breathes an evolved essence (of wah) that goes beyond vintage. As with the XW-1, the pedal has a relay-based true bypass switch and adjustable rocker tension to optimize your rocker pedal to your liking.
Legendary Tone with a Modern Twist:
With the Xotic XW-2 Wah you don’t get one or three sounds in one pedal, you get unlimited sounds with unique controls that shape and contour your sound the way you hear it!
Adjustable Rubber Stopper:
Located on the backside bo¬om of the treadle this rubber bumper can be shimmed to adjust the travel range of the pedal.
Adjustable Pedal Torsion:
Fully-adjustable rocker pedal torsion by adjusting Hex nut on the treadle.
LED Indicator:
The LED indicator is located at the top of the XW-1 and lights up when the pedal is on. One unique feature of the XW-1 is the LED will flash if the battery power falls below 50% and indicates that it is time to change the ba¬ttery.
DC Jack:
2.1mm x 5.5mm 9VDC – Negative Center. When using a battery, the life of the battery can be extended if you unplug the input when the effect is not in use for long periods of time. Ba¬ttery access is through the removal of bo¬om plate (four rubber feet).
Xotic XW-2 Wah Pedal Features:
- “Throatier” voicing thanks to the custom wound inductor and pot
- Wah tone and EQ are “set” so there are no knobs to mess with
- Internal “Q” setting knob to adjust width of the sweep
- Compact design
- Top grade components
- Bright LED power indicator
- Adjustable pedal torsion
- 9 volt battery powered and DC jack