The Voodoo Lab Pedal Power 2 Plus is a universal power supply for all battery-operated guitar pedal effects.
Pedal Power 2 Plus features include two outputs that will power Line 6 modeling pedals and two outputs that can have a variable voltage sag to emulate dying carbon batteries. Like the original Pedal Power, each of its eight outputs are completely isolated, short circuit protected, regulated and highly filtered. The Pedal Power 2 Plus comes complete with cables, detachable AC power cord, is handmade in the USA and carries a 5-year warranty.
I’ve wrestled with various store-bought and custom-made
power supplies over the years, but this was the first time I was able
to connect everything in minutes and get great results
without hum or profanity -Guitar Player
Isolated Outputs
Each output is completely isolated. This means that you won't have any ground loops or interaction between pedals that can cause hum and noise. It also means that unlike other common ground power supplies, you can run effects that have both negative and positive grounds without difficulty.
Boss Pedals
There are two types of Boss pedal effects, which specify either PSA or ACA type power supplies. Boss pedals specifying the PSA type adapter operate at 9V like most other pedals. Boss pedals which specify the ACA type adapter operate at a higher voltage.
The Voodoo Lab Pedal Power 2 Plus is the only universal power supply available which will power any type of Boss pedal effect. There is a selector switch for each DC output on the bottom of the Pedal Power to select the correct voltage.
Short Circuit Protection
Each output on the Pedal Power 2 Plus is short-circuit protected. This means that if you have a short in a power cable, or one of your pedals malfunctions, the Pedal Power will temporarily turn off the power to that pedal. All other outputs will continue to function normally and the Pedal Power 2 Plus is not damaged.
Toroidal Transformer
Power transformers create an electric field that can cause hum and noise in your effects. Some effects, such as wahs, are particularly susceptible to this. A toroidal transformer has a specially designed core that greatly reduces this electric field. The Pedal Power 2 Plus uses this type of power transformer so that your pedal board is quiet.
Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever.
The Classic JR model should be familiar to you. Based on the original PT-JR, the Classic JR features Pedaltrain’s original four-rail design and traditional rail spacing. However, the Classic JR has been updated with an open front design (portholes are history) making power supply mounting more flexible and convenient. Other changes include a wider stance at 18” and the elevation has been raised by approximately 1”. And as always, Classic JR is made with Pedaltrain’s signature featherweight aircraft-grade aluminum.
Included with purchase is 72” (183 cm) of Pedaltrain’s professional grade hook-and-loop pedal fastener and plenty of zip ties for securing cables.