|
DBX 223S Stereo 2-Way/Mono 3-Way CrossoverThe DBX 223S Stereo 2-Way/Mono 3-Way Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the DBX 223S Crossover leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
DBX 223S Stereo 2-Way/Mono 3-Way Crossover Features:
- TRS differentially balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- DBX 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
The DBX 223S is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid click controls to the high quality 1/4 inch TRS inputs and outputs.
DBX 223S Stereo 2-Way/Mono 3-Way Crossover Specifications
- Inputs:
- Connectors: 1/4 inch TRS
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced >50k ohm, unbalanced >25k ohm
- Max Input Level: >+22dBu balanced or unbalanced
- Outputs:
- Connectors: 1/4 inch TRS
- Type: Impedance-balanaced/unbalanced, RF filtered
- Impedance: Balanced 200 ohm, unbalanced 100 ohm
- Max Output Level: >+21dBu balanced/unbalanced into 2k ohms or greater
- Crossover Frequencies:
- Stereo Mode: Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
- Mono Mode: Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
- Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
- Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
- Function Switches:
- Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
- Phase Invert: Inverts the phase at the output, one switch per output
- Rear Panel: x10: Multiplies the crossover frequency range by 10, one switch per channel
- Mode: Selects stereo/mono and 2/3-way operation
- LF sum: Selects normal (stereo) or mono-summed low frequency operation
- Indicators:
- Stereo Operation: Green LED
- Mono Operation: Yellow LED
- Low Cut: Red LED per channel
- x10: Green LED per channel
- Phase Invert: Red LED per output (3 per channel)
- System Performance:
- Bandwidth: 20Hz to 20kHz, +0/-0.5dB
- Frequency Response: < 3Hz to > 90kHz, +0/-3 dB
- Dynamic Range: >106dB, unweighted, any output
- Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
- CMRR: >40dB, typically >55dB at 1kHz
- Signal-to-Noise: Ref: +4dBu, 22kHz measurement bandwidth
- Power Supply:
- Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50/60HZ
- Power consumption: 15 watts
- Physical:
- Dimensions(HxDxW): 1.75 x 6.9 x 19 inches (4.5 x 17.5 x 48.26 cm)
- Weight: 3.7 pounds (1.7 kg)
Recommended Accessories for:
|
MSRP: ex VAT
inc VAT
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
|
|
|
|