• Shure SM137 Instrument Condenser Microphone


  • Overview
  • Specs
  • Manufacturer Info
  • Also Purchased
  • Video & Docs


Shure SM137 Instrument Condenser Microphone, a versatile mic for a variety of applications.
The SM137 has a frequency response that combines the best of both worlds, a smooth high-end and a tightly controlled low-end. Made using an ultra-thin diaphragm, this mic is what is needed when picking up the subtle nuances of an instrument. Providing a 15db pad Shure's SM137 has natural sound reproduction for quiet acoustic and high volume applications.

Road worthy, don't forget to take this mike on tour. Made with rugged nearly indestructable chassis', Shure's SM series of mics were built to take the punishment of night-after-night gigging.

Shure SM137 Features
  • Ultra-thin diaphragm for smooth high end and tight, controlled low end
  • 15dB pad for performance consistency across a wider range of high SPL sources
  • Low self-noise and transformerless preamplifier circuitry
  • Cardioid polar pattern
Shure SM137 Instrument Condenser Microphone Specifications
  • Cartridge Type: Permanently Biased Condenser
  • Frequency Response: 20­ to 20,000 Hz
  • Directional Polar Pattern: Cardioid
  • Output Impedance: 150 ohms (actual)
  • Attenuation Switch: 0 dB or 15 dB attenuation
  • Phantom Power: 48 Vdc +/- 4 Vdc (positive pins 2 and 3)
  • Current Drain: 5.2 mA typical at 48 Vdc
  • Common Mode Rejection: >50 dB, 20 Hz to 20 kHz
  • Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
  • Sensitivity: -41 dBV/Pa (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
  • Self­noise: 19 dB (typical, equivalent SPL; A-weighted (IEC 651))
  • Maximum SPL: @ 1000 Hz
    • 5000 ohms load (Attenuator on): 150 (165 dB)
    • 2500 ohms load (Attenuator on): 144 (159) dB
    • 1000 ohms load (Attenuator on): 139 (154 dB)
  • Output Clipping Level:
    • 5000 ohms load: 15 dBV
    • 2500 ohms load: 9 dBV
    • 1000 ohms load: 3 dBV
  • Dynamic Range: (Attenuator On)
    • 5000 ohms load: 133 (136) dB
    • 2500 ohms load: 128 (130 dB)
    • 1000 ohms load: 122 (125) dB
  • Signal to Noise Ratio: 75 dB
  • Dimensions:
    • Diameter: 0.95 inches (24 mm)
    • Length: 6.375 inches (162 mm)
  • Weight: 6.9 oz (195 grams)



 
 
FREE 12 month Extended WarrantyFree Shipping

MSRP:
ex VAT   inc VAT
 

 
Notify Me!
Quantity:
Add to Cart
Add to Wish List  
 

ShareThis
  • Overview
  • Specs
  • Manufacturer Info
  • Also Purchased
  • Video & Docs
Loading....