KNA Pickups’ HP-1A is a humbucking, soundhole-mounted pickup designed with active electronics for steel-string guitar.
Crafted for the discerning acoustic player who seeks a warm, clear, and vibrant amplified tone.
The added preamplifier delivers noise-free, authentic steel-string guitar sound.
KNA HP-1A Humbucker Soundhole Acoustic Pickup Features
- Active Design: The built-in preamplifier reduces noise and eliminates string grounding. The pre-amp also boosts the tone and delivers clear, true steel-string guitar sound. The pickup requires 2 CR2032 batteries for operation.
- Install with No Modification: Simply drop this pickup into the soundhole of the guitar and gently tighten the mounting screws until it is firmly mounted to the top.
- Wood Case: The high-quality mahogany cap, electronics housed in birch, and lightweight design ensure maximum sensitivity and durability.
- Neodymium Magnets: HP-1A utilizes the power of neodymium magnets to provide a strong, balanced sonic experience.
- Cable Included: A 1/8" to 1/4" cable is included for easy connection to an amplifier or mixer.
Specifications
- Weight: 45.35g. / 1.6oz
- Wood: Mahogany cap, birch housing for electronics
- Impedance: 3.20k?
- Cable Length: 3 meters (9 Ft.)
- Pickup Length on top of Soundboard: 112.4-112.6mm (4.425-4.433 in)
- Pickup Width on top of Soundboard: 33-34mm (1.299-1.339 in)
- Pickup Height on top of Soundboard (not including magnet pole pieces): 14.5-14.6mm (0.571-0.575 in)
- Active Signal Transfer Area Length: 70.3-70.4mm (2.768-2.772 in)
- Maximum Soundhole Diameter: 107.5-107.6mm (4.232-4.236 in)
- Minimum Soundhole Diameter: 80.5-80.6mm (3.169-3.173 in)
**Handmade Pickups May Vary Slightly in Size Due to the Nature of the Building**