Rack Hardware

 
Add a drawer or shelf to your rack. Fill open spaces with blank panels, or add security to critical controls. Install a vent to dissipate heat. Isolate components to minimize hum. AMS has the Rack Hardware you need to get the job done.
Refine your results:
  • The Raxxess UNS1 Universal Rack Tray is a one space, 14-gauge shelf with a hole-pattern in bottom for mounting a variety of half-rack equipment.Finished in durable black baked enamel. To mount the UNS1 rack ...
    Rating   5 out of 5 stars. 8 ratings.
    Price: $34.00
    Save: $5.28 (16%)
    $28.72
     
    $28.72      $28.72
     
    Click for Options
    Options Available
  • Gator Rackworks add dedicated storage space to protect your valuable gear. Featuring steel construction, spring-loaded latches, durable black powder coated finish and a lock. The Gator Rackworks is a perfect rack ...
    Rating   5 out of 5 stars. 2 ratings.
    Price: $247.99
    Save: $93.00 (38%)
    $99.95 - $154.99
     
    From  $99.95      $99.95
     
    3 Payments of $36.67
    Click for Options
    Options Available
  • A sliding vented shelf, the Gator Rackworks GRW-SHELF1SLD is 13.8” deep and takes up only one rack shelf. The GRW-SHELF1SLD features cold rolled 16 gauge steel construction, black powder coated finish, rear ...
    Price: $143.99
    Save: $54.00 (38%)
    $89.99
     
    $89.99      $89.99
     
    3 Payments of $30.00
    Click for Options
    Options Available
  • The GRW-DRWSH2 shallow rack drawer is constructed of cold rolled 16 gauge steel construction. Additional features are fully enclosed drawer with spring-loaded latches, black powder coated finish, heavy-duty smooth ...
    Price: $175.99
    Save: $66.00 (38%)
    $109.99
     
    $109.99      $109.99
     
    3 Payments of $36.67
    Click for Options
    Options Available
  • Hosa 24 Piece Rack Mounting Hardware Kit features 24 screws and washers that are perfect for setting up your next rack. Secure your expensive gear on your new racks with Hosa Rack Hardware Kits! Phillips head ...
    Rating   5 out of 5 stars. 4 ratings.
    Price: $10.45
    Save: $3.75 (36%)
    $6.70
     
    $6.70      $6.70
     
    Click for Options
    Options Available
  • The Moogerfooger Rack Mount kit is designed to allow the Moogerfooger owner to mount Moogerfooger effects in a standard 19' equipment rack. The kit is 6 units high, and can hold up to 3 Moogerfooger units or up ...
    $95.00
     
    $95.00      $95.00
     
    3 Payments of $31.67
    Click for Options
    Options Available
  • The RCH1 accessory rack is a cable or headphone hanger that clamps anywhere on your cart handle. Only compatible with R2, R6, R8, R10 and R12 cart models. CALIFORNIA PROPOSITION 65 WARNING WARNING: ...
    Rating   5 out of 5 stars. 1 rating.
    Price: $39.98
    Save: $9.99 (25%)
    $29.99
     
    $29.99      $29.99
     
    Click for Options
    Options Available
  • 10/32 x .75 inch black oxide, phillips truss head screws with #10 nylon washers to prevent scratching equipment. Available in 25-piece or 100 piece ...
    Rating   5 out of 5 stars. 8 ratings.
    Price: $24.40
    Save: $6.72 (28%)
    $17.68
     
    $17.68      $17.68
     
    Click for Options
    Options Available
  • The Gator Rackworks universal shelf is constructed of 16 gauge steel with universal hole pattern to accommodate a variety of rack equipment. Featuring a black powder coated finish, the Gator Rackworks shelf ...
    Price: $61.99
    Save: $23.50 (38%)
    $38.49
     
    $38.49      $38.49
     
    Click for Options
    Options Available
  • The Gator Rackworks rack screws securely hold your equipment in place and provide additional equipment protection. Finished in black, the rack screws are 10-32 threaded and 3/4” long. CALIFORNIA ...
    Rating   5 out of 5 stars. 1 rating.
    Price: $43.99
    Save: $16.50 (38%)
    $6.59 - $27.49
     
    From  $6.59      $6.59
     
    Click for Options
    Options Available
  • Get Two Pre73's and Rack them Together!   Add a two of Golden Age Project Pre73s and put them together into a single rack space with this handy piece of rack hardware. Easy to install, racking your components ...
    Rating   5 out of 5 stars. 1 rating.
    $49.99
     
    $49.99      $49.99
     
    3 Payments of $16.67
    Click for Options
    Options Available
  • The rugged Gator GRW-PNLSTFT1 steel flat panel is constructed of cold rolled 16 gauge steel with a black powder coated ...
    Price: $11.99
    Save: $4.80 (40%)
    $7.19
     
    $7.19      $7.19
     
    Click for Options
    Options Available
  • The Gator Rackworks slotted panel features elongated vent holes to improve the air circulation in your rack. In addition, the Rackworks slotted panel is 1.2 mm thick and is flanged for rigidity. Gator ...
    Rating   5 out of 5 stars. 2 ratings.
    Price: $25.99
    Save: $10.60 (41%)
    $11.99 - $15.39
     
    From  $11.99      $11.99
     
    Click for Options
    Options Available
  • The Raxxess Rack Rails are strong place holders for your equipment. These rack rails are a well crafted with 11-gauge steel, punched and tapped for 10-32 inch screws. It is full hole rack rail with holes tapped ...
    Rating   5 out of 5 stars. 5 ratings.
    Price: $30.50
    Save: $6.10 (20%)
    $20.88 - $24.40
     
    From  $20.88      $20.88
     
    Click for Options
    Options Available
  • The Raxxess Sliding Rack Drawer features fully-enclosed construction of 16-gauge steel with a black powder coat finish. 12-inch cabinet grade slides allow for full extension. This rack drawer is perfect for ...
    Rating   5 out of 5 stars. 4 ratings.
    Price: $164.00
    Save: $45.60 (28%)
    $118.40
     
    $118.40      $118.40
     
    3 Payments of $39.47
    Click for Options
    Options Available
  • The VX-351 Rack mount kit can be used to mount 2 of the following: VX-351, VX-352, or CP-251. It is three rack spaces high, and is designed to fit any standard 19' equipment rack. It comes with all the necessary ...
    $95.00
     
    $95.00      $95.00
     
    3 Payments of $31.67
    Click for Options
    Options Available
  • Moog 104HP Conversion Kit expands the Mother-32 Two and Three Tier rack kits to fit 104HP cases. CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - ...
    Price: $24.99
    Save: $5.00 (20%)
    $19.99
     
    $19.99      $19.99
     
    Click for Options
    Options Available
  • Protect your equipment and keep the airflow going! The GRW-PNLPRF1 1U perforated flanged panel is constructed with cold rolled 16 gauge steel, black powder coated finish, flanged for rigidity and features 5/32' ...
    Price: $21.99
    Save: $8.80 (40%)
    $13.19
     
    $13.19      $13.19
     
    Click for Options
    Options Available
  • The Middle Atlantic RKRAP12MP Rear Access Panels work for Middle Atlantic MBRK and BRK 22 and 28 inch deep racks. Provide your equipment with ultimate protection with these great studio rack rear panels! Choose ...
    Rating   5 out of 5 stars. 1 rating.
    Price: $159.52
    Save: $109.57 (69%)
    $49.95
     
    $49.95      $49.95
     
    3 Payments of $16.65
    Click for Options
    Options Available
  • The SKB VS1 Sliding Rack Shelf lets you be totally creative with your rack. Its cushioned, heavy-duty Velcro® surface will hold hundreds of different gizmos and gadgets. The shelf is 2 spaces high and its ...
    Rating   4.5 out of 5 stars. 2 ratings.
    Price: $228.99
    Save: $95.00 (41%)
    $133.99
     
    $133.99      $133.99
     
    3 Payments of $44.67
    Click for Options
    Options Available