 |
 |
 |
 |
 |
 |
 |
 |
|
| Call Us 24/7 At: 1-800-458-4076 |
|
|
|
|
|
|
|
|
|
|
|
|
|  | | CAD |
Model Options:
CAD GXL1200 Instrument Condenser MicrophoneThe CAD GXL1200 Insturment Condenser Microphone is packaged in a small, rugged, all metal housing and provides transparent sound reproduction.
The transformerless design of this instrument microphone allows it to have low distortion and optimum low end frequency response. The GXL1200's size, accurate sound reproduction, and high SPL capability, make this a great choice for miking overheads, high hats, cymbals, woodwinds and stringed instruments.
CAD Microphone Quality
The GXL1200 microphones are audio tested and inspected under the direction of CAD Professional Microphones, offering an exceptional level of value.
AMS also offers the CAD GXL1200 in a package that includes an On Stage 7701B boom stand and a 20-foot CBI mic cable.
CAD GXL1200 Specifications
- Generating Element: Externally Biased Condenser
- Polar Pattern: Unidirectional (Cardioid)
- Frequency Response: 30 Hz - 20 kHz
- Sensitivity:
- Power Level: -36dB 0dB=1mW per 10 microbars
- Open Circuit Voltage: -56dB 0dB=1V per microbar
- Impedance: Low (Less than 200 Ohms)
- Equivalent Noise Level: +14dB (A-weighted)
- Power: P24V or P48V Phantom Power
- Connector: 3 pin XLR
- Phasing: Positive pressure on diaphragm generates a positive voltage on pin #2 relative to pin #3
- Dimensions:
- Diameter: 0.88 inch
- Length: 5.33 inches
- Weight: 126 Grams
|
|
Rate and Review this Product:
 4 people rated this item  | Alan Rausch from Eastern Shore Maryland | | | Overall Ranking: | | Quality:
|  | | Features:
| | | Value:
| | | Ease of Use:
| | | Sound:
| | | Subject: | Cleanest and Quietist Mic in this price range and more. | | Quality:
| Time will tell, but so far so good. | | Features:
| This is one of the best small condenser mics I have used. Captures lows on my dobro/slide resonator better than audio technica ae5100 at 5x the price. Use the windscreen to cut out pick noises. | | Ease of Use:
| Phantom power like all condensers. I actually had to back away slightly more because it captures so much, like pick noises. Once I found the right distance it was fine. I was using high end $200+ mics and like this much better. | | Sound:
| Just what I was looking for live sound in bluegrass. Complete accuracy in banjo, guitar, dobro and mandolin. Also used it between vocal and instrument and did supprisingly well. | | Value:
| I would buy a hand full of these before I bought anything more expensive. I use all CAD mics now. | | Do you own this product?:
| yes | | Date submitted:
| 10=18-09 | |
| | Jack L from Chicago, IL, USA | | jack_loganbill@yahoo.com | | Overall Ranking: | | Features:
|  | | Ease of Use:
| | | Quality:
| | | Sound:
| | | Subject: | Another Incredible CAD Value | | Quality:
| It is built very well, solid, should last as long as any other similar condenser mic. Came with nice zippered-pouch. | | Features:
| It's best feature is it's ability to capture acoustic guitar and voice accurately and cleanly. It competes very well with our Rode M3 and is slightly better than our AT-2021. It works very well in combination with our Studio Projects B1 large condenser mic. For home studios that do not have dedicated and proper environments for mic recording, it is foolish to spend $$$$$ on mics, thus I am grateful that Rode, Studio Projects, and CAD offer great mics for few dollars. | | Ease of Use:
| Plug the cable in and go. | | Sound:
| I don't detect any coloration to the sound. I was so happy with the sound, I purchased a second CAD GXL 1200. AMS price matched a non-music store retailer's unbelievable price. Plus, AMS shipped it for free arriving the second day after I ordered it. | | Do you own this product?:
| Yes | | Date submitted:
| 12/29/2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|