-
Snare Drum Heads
$21.99 - $30.99Evans Genera HD Dry Snare heads feature two plies of film. An outer ply of 5mil film and an inner ply of 7.5mil film, in combination with a 2mil overtone control ring on the underside that "floats" with the head, el...h m s
-
Evans EPPB-DB1-R dB One Rock Pack 10/12/16/14 Snare/22 Bass
$187.99Evans dB One Rock System Pack offers you unprecedented freedom to play how you want, when you want. This pack features three dB One mesh tom heads (10” 12” and 16”) and a 22” mesh bass drumhead which, utilizing seve...6 Payments of $31.33
h m s
-
Evans Blue Hydraulic Bass Drum Head 22 Inch
$56.99Get that deep, fat, and short pioneering sound of early 1970's rock and roll with the durable, two-ply film featured in the Evans Hydraulic series. Also easy to tune, this drumhead is perfect for troublesome drums o...4 Payments of $14.25
h m s
-
Evans Red Hydraulic Drumhead
$23.99 - $29.99Evans red Hydraulic series features a thin film of oil between two plies of 7mil film offering maximum durability, a fat, deep and short sound pioneered by early 70's rock and roll. Hydraulics are famously easy to t...h m s
-
Evans EQ Pad Bass Drum Muffling Pad
$19.99 - $47.50The Evans EQ Pad is a highly efficient bass drum muffler that enables control over attack and sustain. It's designed with a hinge that allows the damping agent to jump away from the head at impact before returning t...h m s
-
Evans TT16EMAD 16" Clear Bass Drum Head Tom Hoop Version
$53.99In the past, 16” bass drums have been considered quite unconventional, often being made from an extra 16” floor tom with conversion kit hardware. In recent years, 16” bass drums have become more common in factory co...4 Payments of $13.50
h m s
-
Evans Genera HD Dry Coated 14 Inch Snare Drum Head Packages
$69.99Evans Genera HDD Dry Snare heads feature two plies of film. An outer ply of 5mil film and an inner ply of 7.5mil film, in combination with a 2mil overtone control ring on the underside that "floats" with the head, e...4 Payments of $17.50
h m s
-
Evans EMAD 2 Coated Bass Drum Head 22 Inch
$59.99 - $84.98EVANS coated 22-inch EMAD batter series features a 10mil of single-ply film providing an ideal balance of punch, power and low-end. The EMAD contains two interchangeable damping rings that maximize attack and low-en...4 Payments of $15.00
h m s
-
Evans Heavyweight Coated Dry Dot Snare Head 14"
$36.99The 14" Evans Heavyweight Dry features two plies of 10mil film providing maximum durability, compressed attack, and a wide dynamic range. The 3mil Reverse Dot lends extra durability, focus, and attack in the center....h m s
-
Evans EMAD Clear Bass Drum Head
$53.99 - $89.98The EMAD comes with 2 dampening rings, each of which affects the head's sound and pedal response. This external system not only maximizes natural attack characteristics and offers tremendous dynamic range (even at l...4 Payments of $13.50
h m s
-
Evans Heavyweight Coated Snare Head 14 Inch
$27.99 - $69.99The Heavyweight snare batter head is the thickest, most durable film-based drumhead in the Evans product line. Designed with the “heavy hitter” in mind, the Heavyweight is 23mil thick at the center of the head. Whil...4 Payments of $17.50
h m s
-
Evans SoundOff Rock Drum Mute Set 10" 12" 14" 16"
$36.50SoundOff drum mutes are the most popular line of volume control products available. The mutes provide a significant volume reduction to keep practice noise to a minimum. SoundOff drum mutes feature a durable constru...h m s
Skip to Content
Get FREE shipping on all orders!
Fast FREE shipping on all orders!
Evans
The First. The Finest. The Future. Evans Drumheads has been in the music industry for more than 40 years, and those six words best describe the history and vision of the company. Decades ago, Evans was the pioneer of drumhead manufacturing and design. Today, we are the innovators.
Evans Drum Heads: Built to Shape Your Sound
Evans has been an innovator in drumhead manufacturing for over 60 years, producing every head in the USA with Level 360 Technology for a consistent, even fit on every drum. At American Musical Supply, we carry the full Evans lineup, from single-ply G1 heads to the oil-filled Hydraulic series and the adjustable EMAD bass drum system. Whatever your kit needs, we have the Evans drum heads to match.
Evans Level 360 Technology
One of the biggest frustrations drummers face is seating a new head evenly on the bearing edge. Evans addresses this with Level 360 Technology, a collar design that extends the playing surface evenly around the full circumference of the drum. The head sits flat and makes consistent contact from the moment you place it on the shell. The result is easier tuning, a wider usable pitch range, and fewer dead spots caused by uneven tension. If you’ve ever wrestled with a head that just wouldn’t sit right, Level 360 is a noticeable improvement.
Popular Evans Drum Head Series
Evans organizes their drum heads into distinct series, each designed around a specific tonal goal. Understanding what each series does makes it much easier to pick the right head for each drum in your kit.
The G1 series uses a single ply of 10mil film for a bright, open sound with plenty of sustain. It works well on snares and toms where sensitivity and dynamics are the priority. The G2 series steps up to two plies of 7mil film, adding durability and a fuller tone with controlled sustain. G2 heads are some of the most popular drum heads on the market for good reason.
The Hydraulic series takes a different approach entirely. A thin layer of oil sits between two plies, naturally muffling overtones and shortening sustain without external dampening. The result is a fat, punchy sound that works especially well for rock and heavier styles. The EC2 series uses Sound Shaping Technology (SST), an Edge Control ring mounted on the underside that varies in size by head diameter, delivering a balanced, pre-EQ'd response across the full kit.
For bass drums, the EMAD system gives you externally mounted adjustable damping that lets you swap between foam rings to change attack and sustain without ever removing the head. It is one of the most practical bass drum head designs available.
Single-Ply vs. Two-Ply Evans Heads
The choice comes down to how you play. Single-ply heads like the G1 are more resonant and sensitive to a lighter touch, picking up ghost notes and brush work easily. Two-ply heads like the G2, EC2, and Hydraulic handle harder hitting with more durability and a focused, controlled tone. Both are available in clear and coated finishes. Coated adds warmth and works well with brushes; clear is brighter and more articulate. For tips on getting the most out of any head, check out our guide on how to tune drums.
Frequently Asked Questions About Evans Drum Heads
Can I use Evans heads on any brand of drum?
Yes. Evans drum heads are designed to fit standard drum sizes from any manufacturer. Level 360 Technology helps them seat evenly regardless of the shell brand.
How long do Evans drum heads last?
It depends on how often and how hard you play. Two-ply heads like the G2 and Hydraulic series last longer under heavy use, while single-ply heads like the G1 may need to be replaced sooner if you hit hard regularly.
What's the difference between coated and clear Evans heads?
Coated heads add warmth and a slightly darker tone, and they work well with brushes. Clear heads are brighter and more articulate, which makes them popular for toms and live settings where projection matters.
Find the Right Evans Drum Heads at AMS
A fresh set of Evans drum heads can change the way your entire kit sounds and responds. Whether you need the open sustain of a G1, the focused punch of a G2, or the fat attack of a Hydraulic, we carry the full range. American Musical Supply offers 0% interest financing and VERY fast and free shipping on Evans drum heads, so you can upgrade your kit without waiting. Browse our full Evans selection and hear the difference.
