Fender GTX7 Footswitch for Mustang GTX Amps

The Fender GTX-7 Footswitch was developed for use with Mustang GTX amplifiers, allowing users to select various presets and effects from the floor. Looper buttons access the amp’s “Record,” “Play,” “Overdub,” “Stop” and “Undo” functions, Tap Tempo is accessible for time-based effects, and the chromatic tuner is also selectable on demand. Removable cable with 1/4” plugs included.

Fender GTX-7 Footswitch Features

Controls: Bank Up/Down, Mode/Tuner, FX1, FX2, FX3, FX4, FX5, Looper
BANK UP/ DOWN SWITCH: Functions in Preset Mode; Pressing switch and releasing will bank up by 5 presets, press and hold will bank down by 5 presets
MODE/TUNER SWITCH: Pressing switch and releasing will switch between three of the modes (Looper, Effects, Presets); press and hold will switch to Tuner mode
FUNCTION SWITCHES: These five numbered buttons enable selection and foot control of the different functions depending on selected mode. All functions will be activated on down-press. Tap on the currently selected preset to change the preset Tempo. The PRESETS mode LED will flash to indicate tempo
DISPLAY SCREEN: Shows preset selected, effects mode and tuner
MODE LEDS: These three LEDs at far right indicate which of three modes is in use – Looper (Green), Effects (Amber), and Presets (Red).
FUNCTION LEDS: Series of 5 red LEDs along the top of each function switch just below the DISPLAY SCREEN that indicate various functions in use
Connection: 1/4" Jack for TS cable connection to compatible amp
Included Accessories: 1/4 inch Cable

CALIFORNIA PROPOSITION 65 WARNING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

See all items from FENDER

Shop Similar Models

Guitar Amp Footswitches & Controllers

About the Manufacturer

Phone: 800-856-9801

Warranty: 2 Years Limited on Custom Shop; 2 Years Limited on Stringed Instruments; 2 Years Limited on Electronic Products; 5 Years Limited Transferable on Fortis; 1 Year Limited on Accessories; 1 Year on IEM; 90 Days on Vacuum Tubes