Peavey 6505 1992 Guitar Amplifier Head with 6505 II 4x12 Straight Cab

The 6505 1992 guitar amp head is drenched in classic tube tone! Authentically produces the much loved tones of the legendary Peavey 6505.

The Peavey 6505 Reissue 412 Straight guitar cabinet has been designed to the exacting specifications of our original 1992 version with a few basic updates that have been requested by countless artists over the years. Each cabinet features four 12" Sheffield 1230+ specially-voiced speakers loaded in a biplanar-aligned, infinite baffle, 300W closed-back cabinet. Dual 1/4" jacks with Stereo/Mono selector, solid Birch plywood construction, recessed handles, and heavy-duty pop-out casters complete the package.

Peavey 6505 Reissue 412 Straight Guitar Cabinet Features

Four 12" Sheffield 1230+ speakers
300W handling
Dual 1/4" jacks
Stereo/Mono switch
High-density Birch plywood construction
Recessed handles
Heavy-duty pop-out casters
16 ohms mono, 8 Ohms per side stereo

Peavey 6505® Reissue 412 Straight Guitar Cabinet

The 6505© series amplifiers and enclosures are the result of extensive research and development to produce the ultimate products for guitarists. With the 6505 1992 Original, 6505 II, and 6505 MH heads, you'll experience super rock crunch, harmonic-rich sustain, and screaming drive like you've never heard before. Production models are identical to those used by countless legendary artists for recording, as well as on tour.

See all items from PEAVEY

Shop Similar Models

Guitar Stacks

About the Manufacturer

Phone: 800-821-2279

Warranty: 2 Years on Guitars/Basses, Amp, Pre-Amps, Mixers, Electronic Crossovers & EQs; 2 Years on Drums; 2 Years on Enclosures; 1 Year on Digital Effects, Keyboard & MIDI Controllers; 2 Years on Mics; 1 Year on Speaker Components (including replacement parts) & All Accessories; 90 Days on Tubes & Meters

Peavey 6505 1992 Guitar Amplifier Head with 6505 II 4x12 Straight Cab Specifications

Peavey 6505 1992 Guitar Amplifier Head with 6505 II 4x12 Straight Cab Specifications
Product Specifications	Peavey 6505 1992 Guitar Amplifier Head Specifications Power Amplifier Section: Rated Power & Load: 120 W RMS into 16, 8, or 4 ohms Power @ Clipping: (Typically @ 5% THD, 1 kHz, 120 V AC line) 130 W RMS into 16, 8, or 4 ohms (Bias must be reduced to measure) Frequency Response: +0, -3 dB, 50 Hz to 20 kHz, @ 100 W RMS into 8 ohms Hum & Noise: Greater than 75 dB below rated power Power Amp EQ: Active Presence: +10 dB 2 kHz Active Resonance: +10 dB @ cabinet resonant frequency Power Consumption: (Domestic) 400 watts 50/60 Hz, 120 V AC Preamp Section: The following specs are measured @ 1 kHz with the controls preset as follows: Low & High EQ @ 0 Bright out Lead & Rhythm Post @ 10 Presence & Resonance @ 0 dB Nominal levels with Pre Gains @ 5 Minimum levels with Pre Gains @ 10 Preamp High Gain Input: Impedance: Very high Z, 470K ohms Lead Channel (with channel select in): Nominal Input Level: -80 dBV, -1 mV RMS Minimum Input Level: 92 dBV. /025 mV RMS Clean Channel (with channel select out): Nominal Input Level: +34 dBV, 20 mV RMS Minimum Input Level: -50 dBV, 3 mV RMS Maximum Input Level: 0 dBV, 1.0 V RMS (Subtract 16 dB with Crunch switch in) Preamp Low Gain Input: (-6 dB pad) Impedance: High Z 44K ohms All levels are increased by +6 dB Effects Send: Load Impedance: 47K ohms or grater Nominal Output: -10 dBV, 300 mV RMS Effects Return: Impedance: Very high Z, 470K ohms Designed Level: -10 dBV, 300 mV RMS Preamp Output: Load Impedance: 47K ohms or grater Nominal Output: +10 dBV, 3 V RMS Remote Footswitch: Special 2 button unit with LED indicators (supplied) Channel select & Effects loop bypass System Hum & Noise @ Nominal Level: (Clean channel) 120 Hz to 20 kHz unweighted) Greater than 74 dB below rated power Equalization: Custom Low, Mid & High passive type EQ Push Bright, (Rhythm channel only) +6 dB @ 2 kHz Push Crunch (Rhythm channel only) Increases gain